Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Marina del Rey
Gate parts and welding in Marina del Rey means working on gates that live in open-water salt air, day after day. We replace corroded hinge posts, weld cracked ornamental rails, and rebuild gate frames on the spot so they don’t end up in a scrap pile. If your Marina del Rey gate is sagging, seized, or the operator is fighting a rusted frame, call Hal at (323) 677-4063 and describe what you’re seeing. He’ll tell you straight whether it’s a weld job or a parts swap, and what it’ll cost before anyone shows up.
Why Gatewood Fence & Gate Is Marina del Rey’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and the name is on the shop and every invoice. We’re not a national outfit that quotes one price on the phone and charges another at the door. In Marina del Rey, our Gate Parts & Welding team handles everything from a seized hinge on a garden-style complex off Admiralty Way to a snapped post base at a marina-front property on Via Marina. A live person answers our phone 24/7, not a queue. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. No runaround.
Because this is Marina del Rey and not an inland city, we know the gates here fight the Pacific. Salt haze settles on every iron and steel surface. Hinge posts rot at the base where sprinkler water, sea fog, and oxygen meet. Operators short out when unsealed housings collect marine moisture. We stock the parts and the welding consumables for that environment, and we know how to fit a replacement so it doesn’t fail the same way in eighteen months.
Our Gate Parts & Welding Services in Marina del Rey
Hinge Replacement
We replace worn and corroded hinges on swing gates throughout Marina del Rey, from lightweight pedestrian gates at 1960s apartment towers to heavy ornamental driveway gates on Admiralty Way. A gate that sags in the middle is usually telling you the hinge has failed or the post has moved. We cut out the old hinge, weld in a new galvanized or stainless hinge, and re-hang the panel so it swings true. Most hinge replacements in Marina del Rey run $180-$420 depending on gate weight and whether we’re welding on site.
Post Replacement
In Marina del Rey, the hinge post is the first thing salt air kills. When it corrodes through at the base, the gate leans and no amount of panel welding will hold. We remove the failed post, pour a new county-permitted footing, and weld in a fresh galvanized post. Then we re-hang the gate and re-set the operator. It’s the difference between fixing the gate once and refixing it every year. Post replacement with a new footing typically runs $400-$900 depending on post size and fence type.
Rail Repair
Cracked and rusted top and bottom rails on Marina del Rey gates get welded back to structural condition, not patched with bolts. We grind out the rust, weld the crack solid, and reinforce the joint where needed. If the rail is too far gone, we cut a section and weld in a replacement so the gate keeps its original look. Rail repair on a typical 8-to-12-foot gate runs $150-$350.
Custom Welding
Some Marina del Rey buildings have ornamental gates you won’t find in any catalog. Curved scrollwork, custom finials, intercom mounting plates, drop rods, and security picket extensions are all things we weld in our shop and on site. Whether it’s matching a 1970s gate design outside a garden complex or adding a latch housing to a marina walkway gate, we weld to match. Custom welding is quoted by the job; simple brackets start around $80, full ornamental repairs start around $250.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marina del Rey
We service and stock parts for Mighty Mule, LiftMaster, FAAC, and BFT operators, among others. If your LiftMaster operator is fighting a rusted frame, we’ll straighten the frame before we touch the motor so the new part isn’t defeated by the old problem. If a BFT board has been ruined by marine-layer moisture inside an unsealed housing, we’ll replace it and seal it properly. For Mighty Mule hardware on smaller residential gates near Culver City’s edge, we keep common arms and boards on hand for quick turnaround.
Common Gate Parts & Welding Problems We See in Marina del Rey Homes
- Hinge posts corroded through at the base. Decades of salt air and sprinkler moisture eat the post where it meets the concrete. The gate leans, welds crack, and operators bind. We cut out the post, pour a new county-permitted footing, and weld in a fresh galvanized post.
- Marine layer moisture inside operator housings. Unsealed housings on LiftMaster, FAAC, and BFT units collect damp air every summer morning. Boards short out. We replace the board and seal the housing so it stops happening.
- Underground conduit corrosion near the channels. Loop detector and photocell wiring in buried conduits oxidizes faster near open water. Intermittent refusal to close, false entrapment reversals, or a gate that won’t respond to the intercom are common symptoms. We trace the run, pull fresh wire, and seal the conduit ends.
- Ornamental welds cracking from panel flex. When a hinge post softens, the whole panel flexes, and the decorative welds are the first to crack. Weld the panel without fixing the post and you’ll weld it again next spring. We fix the post first.
Pricing for Gate Parts & Welding in Marina del Rey, CA
Here are honest ranges for the work we do in Marina del Rey. Hinge replacement: $180-$420. Post replacement with new footing: $400-$900. Rail repair: $150-$350. Custom ornamental welding: starts at $80 for brackets, $250 for full repairs. Gate operators with loop detector service: $150-$500 depending on the fault. These are the numbers you’ll see on the written estimate, and the price we quote is the price you pay, agreed before we start. No trip charge inside the county, and we take $40 off any repair over $200. Seniors and veterans always get 10% off. Call (323) 677-4063 for a free estimate.
One thing that’s different here: Marina del Rey is unincorporated LA County. When a gate job touches a post footing or operator wiring, the permit goes through LA County Public Works, not LADBS. Contractors who mostly work Culver City or Santa Monica sometimes miss this and stall the job. We pull county permits from the start, so the project doesn’t sit half-finished waiting on paperwork.
At a 1970s garden-style complex on Via Marina, our crew found a leaning swing gate where the hinge post had corroded through at the base from decades of salt air. We cut out the failed post, poured a new county-permitted post footing, welded a fresh galvanized hinge post, and hung the original ornamental gate so it swings silently again. The FAAC gate operator was also re-secured, and the loop detector re-tuned for the new post position.
We Also Serve Cities Near Marina del Rey
We regularly cross into Culver City for residential gate repairs, down to Santa Monica for commercial entry systems, over to Beverly Hills for ornamental driveway gates, and up through West Hollywood for apartment building gate service. Same crew, same 90-Day Done Right Promise. Call (323) 677-4063 and we’ll tell you when we can be there.
Serving Marina del Rey, CA - Our Local Coverage Area
We’re based in the Marina del Rey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Marina del Rey
Yes, when the job involves cutting out the old post and pouring a new footing, Marina del Rey’s unincorporated county status means the permit comes from LA County Public Works, not LADBS. We pull the permit before we start, so there’s no lag between cutting the old post out and finishing the new one. Call (323) 677-4063 and we’ll confirm what your specific gate needs.
Because the hinge post is the real problem. In Marina del Rey, salt air corrodes the post at the base until it leans, and welding the panel just transfers the load to a post that’s already failing. We fix the post first: new footing, new galvanized post, then re-hang the gate. That’s the only repair that lasts. Get a free on-site look by calling (323) 677-4063.
Yes. Marina del Rey’s mid-century complexes have ornamental ironwork that doesn’t match anything in a modern catalog. We weld replacement scrollwork, finials, pickets, and brackets to the original pattern, then prime and coat to match. If the gate is from a specific era or design, send Hal a photo or have him come look, and he’ll tell you if it’s a match-weld or a full replacement. Call (323) 677-4063 with a picture of the gate.
Most likely, moisture has gotten into the buried conduit and the loop wire is corroded or shorting, which is common near the open channels in Marina del Rey. The false reversals and refusal to close are the detector misreading. We pull fresh loop wire, seal the conduit, and re-tune the detector to the gate. That fix runs $150-$400 depending on conduit length. Call (323) 677-4063 for a free diagnosis over the phone or at the gate.
You start with sealed, marine-rated components and proper alignment. We use galvanized or stainless hardware on the hinge side, sealed operator housings, and we re-set the gate so the operator isn’t fighting a sagging frame. Then we tune the open and close limits so the gate stops softly instead of slamming. Marina del Rey’s damp air shortcuts cheap hardware fast; we don’t install cheap hardware. Call (323) 677-4063 and we’ll come evaluate your gate.
If your gate in Marina del Rey is sagging, seized, or the operator is grinding against a rusted frame, call (323) 677-4063 now. A live person answers, day or night, and Hal can usually have someone to your gate the same day. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marina del Rey gate repair and welding needs with on-site service and a written guarantee.