Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Hollywood
Gate parts and welding in West Hollywood means dealing with a very specific set of problems: salt-laden marine air eating at 60-year-old wrought iron, hinges ovalizing under the weight of 30-unit apartment traffic, and a Building & Safety department that has its own rules for gate work. Gatewood Fence & Gate handles all of it. We weld on site, we stock the parts that actually hold up in this climate, and we show up when we say we will. If your gate is sagging, dragging, or the latch won’t catch, call (323) 677-4063 and talk to a real person, not a voicemail.
Why Gatewood Fence & Gate Is West Hollywood’s Preferred Gate Parts & Welding Company
We have been at this since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That is not a marketing line; it is how we have always worked. West Hollywood building owners call us because we fix the post the last company ignored, we weld the rail the last company said needed a full replacement, and we stand behind it with a 90-Day Done Right Promise in writing, not buried in fine print.
The calls come from all over West Hollywood: courtyard buildings off Santa Monica Boulevard, hillside homes above Sunset, the bungalow courts near Plummer Park. Our crews know those streets and the buildings on them. When a 1960s apartment gate on Harper Avenue strips its latch bolt, we know what we are walking into before we park the truck. You will get a straight answer, a written price agreed before any work starts, and a live person on the phone 24/7. Not a dispatch queue. Us.
We are state-licensed, carry full insurance and bonding, and every person who shows up is background-checked and in a Gatewood uniform. We service nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And if you have a written estimate from another company, bring it in. We will give you a free second opinion so you know whether you are being sold work you don’t need.
- Local knowledge that matters: West Hollywood’s marine layer, mid-century housing stock, and separate Building & Safety jurisdiction all affect how a gate should be repaired. We factor all three into every job.
- On-site welding: Your gate stays in your driveway or at your building. We don’t haul it to a shop three towns over.
- Upfront pricing: The number we quote is the number on the invoice. You agree to it before we touch a tool.
- 90-Day Done Right Promise: If it is not right, we make it right. One call brings us back, no runaround.
- Standing offers: $40 off any repair over $200. No trip charge inside the county. A permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in West Hollywood
Most gate failures in West Hollywood trace back to a few worn or corroded components. We replace those parts, reinforce what is worth saving, and weld on site so the gate does not leave your property. Here is what we do most often in this city.
Hinge Replacement
Hinges are the first thing to go on a West Hollywood gate. The salt-laden morning marine layer pits bare steel, and the daily cycling of 10 to 50 residents per gate ovalizes the pin holes until the gate sags and drags. We remove the old hinges, grind back the corrosion, and weld in new stainless steel hinges sized for the weight of your specific panel. A hinge replacement in West Hollywood typically runs $180 to $420 depending on gate weight and access.
Post Replacement
A gate sags in the hinge post, not in the middle. That is where we start. Older West Hollywood buildings often have original mild steel posts set in shallow concrete, and after 50 or 60 years the footing cracks and the post leans. We cut out the old post, pour a deeper footing where the gate’s weight and swing demand it, and set a new post that will not move. Post replacement in West Hollywood generally runs $600 to $1,400, more if the gate is a heavy vehicular panel or the footing needs significant excavation.
One thing to know before you start: West Hollywood Building & Safety has its own permitting process, separate from the City of LA. A hinge post replacement on an automatic gate can trigger a code review, especially if the gate serves more than a certain number of units or sits close to a property line. We handle the paperwork and know the local inspectors. It is part of doing the job right here.
Rail Repair
The bottom rail is where rust-jacking starts. Marine moisture wicks into the joint between the rail and the vertical pickets, the rust expands, and the rail splits. You can see it as a bulge or a flaking seam near the bottom of the gate. We cut out the rotted section and weld in a new rail, then treat the surrounding steel so the same thing doesn’t happen again next year. Rail repair in West Hollywood typically runs $250 to $600 depending on the length of steel involved and how much of the panel has to be cut back.
Custom Welding
Not every repair has a part number. Broken decorative scrollwork, a bent frame from a delivery truck, a section of gate that never fit right in the first place: we fabricate and weld on site. We work in mild steel for repainting or stainless where rust is a constant fight. Custom welding is quoted per job, but most small-to-medium West Hollywood repairs run $350 to $900, and you will see the price on paper before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We certify and service LiftMaster, FAAC, and BFT gate operators, along with Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite. Why does that matter for parts and welding? Because a gate operator that is fighting a corroded, sagging panel burns out boards and motors. We fix the mechanical side first so the operator actually works, then we replace boards, gearboxes, or safety edges only if they genuinely need it. For West Hollywood customers, we stock common liftgate and opener parts locally so a repair doesn’t stretch into a two-week wait on a ground shipment.
Common Gate Parts & Welding Problems We See in West Hollywood Homes
The city’s housing stock and climate create a specific pattern of failures. Here is what we see most, from the flats to the hills:
- Rust-jacked bottom rails on 1940s to 1970s wrought iron. Marine-layer moisture wicks into the seams where rail meets picket, expands as rust, and splits the steel. This is the single most common welding repair we do in West Hollywood.
- Ovalized hinge pin holes on multi-tenant gates. When 30 units cycle the same swing gate every day, the pin holes in mild steel hinges stretch within a year or two. The gate starts to sag, then the latch stops catching, then the operator burns out trying to overcome the drag.
- Failed legacy operators after a hinge or post repair. A building fixes the sag, but the old LiftMaster or FAAC board has been running hot for months. It fails shortly after. We catch this early and replace the board during the same visit when possible.
- UV-degraded rollers and seals. Southern California sun breaks down nylon rollers and rubber seals on sliding and rolling gates much faster than manufacturers’ inland ratings predict. We replace them with materials rated for the exposure.
Pricing for Gate Parts & Welding in West Hollywood, CA
Here is what you should expect to pay in West Hollywood for the most common repairs. These are real ranges based on what we have quoted and completed in this city, not generic national averages.
| Service | Typical West Hollywood Range |
|---|---|
| Hinge replacement (single pedestrian gate) | $180 – $420 |
| Hinge replacement (heavy vehicular gate) | $350 – $700 |
| Post replacement (pedestrian gate) | $600 – $1,100 |
| Post replacement (vehicular gate) | $900 – $1,400+ |
| Weld repair (bottom rail, rust-jack cut-out) | $250 – $600 |
| Custom welding / fabrication (per job) | $350 – $900 |
What moves the price? Gate weight and access are the big ones. A 1960s courtyard gate set back from the street with a narrow walkway takes longer to work on than a driveway gate with open access. Permit fees, if West Hollywood Building & Safety requires a review, are separate and we disclose them before you sign anything. Every job is quoted in writing and agreed before work starts. You will never see a surprise line on the invoice. Call (323) 677-4063 for a free estimate.
We Also Serve Cities Near West Hollywood
Our gate parts and welding work covers West Hollywood and the surrounding area, including gate parts and welding in West Hollywood, Beverly Hills, Studio City, North Hollywood, and Sherman Oaks. If your building sits just outside the city line, you are still in our service area and you get the same on-site welding and the same written promise. For a look at everything we do, see our full Gate Parts & Welding service page.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Hollywood
Volume and salt. A West Hollywood courtyard gate serves 10 to 50 residents a day, cycling hundreds of times; a Beverly Hills estate gate might open ten times. The marine layer adds salt-laden moisture that accelerates corrosion, and the combination ovalizes hinge pin holes in months, not years. Our advice is to replace mild steel hinges with stainless before they fail, especially on any gate with an automatic operator. Call (323) 677-4063 and we will tell you if your hinges are at that point.
In most cases we can weld it. The key is whether the surrounding steel has enough sound material to hold a weld. We grind back the corrosion, test the thickness, and if the panel is structurally worth saving, we cut out the bad section and weld in new steel. We have saved dozens of original courtyard gates in West Hollywood this way. If the gate is too far gone, we will tell you straight and quote a replacement rather than selling you a patch job that fails in a year.
The hinge repair probably corrected the sag, but the control board had already been running hot for months while the operator struggled against the drag. It fails shortly after the mechanical repair because the damage was already done. We see this all the time on legacy LiftMaster and FAAC units in West Hollywood apartment buildings. The fix is a new board matched to the operator, plus a check that the gate now swings freely so the new board does not inherit the same problem.
It can. West Hollywood Building & Safety operates independently from the City of LA, and when you replace a hinge post on an automatic gate, you may be changing the gate’s structural configuration, which can trigger a permit review. If the gate serves a multi-unit building, the accessibility and setback requirements come into play. We handle the paperwork and coordinate with the city so you are not caught mid-project wondering if you are out of compliance.
Stainless. Hot-dipped galvanized is fine inland, but West Hollywood’s marine layer puts salt on everything every morning. Galvanized fasteners pit and fail within a few years. We use stainless steel fasteners and stainless or properly primed and painted steel for welded repairs on the coastal side. It costs a little more up front and saves a full rework in three years. Call (323) 677-4063 and we will quote it both ways so you can see the difference in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood since 2001.