Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Marina del Rey
When a gate stops working in Marina del Rey, it’s rarely a simple fix. The salt air off the marina channels works on hinges, posts, and operator boards year-round, and by the time a gate fails, the corrosion has usually been building for years. We’ve been repairing and welding gates here since 2001, and we know exactly what the marine environment does to metal. If your gate is sagging, grinding, or refusing to open, call (323) 677-4063 and a live person answers, day or night. We’ll get eyes on the problem fast, and we’ll quote the price before we touch a bolt.
Why Gatewood Fence & Gate Is Marina del Rey’s Preferred Gate Repair Company
We’re not a franchise and we’re not a dispatch service. Hal Gatewood’s name is on the shop, and his crews work Marina del Rey week in, week out. Property managers along Admiralty Way, Via Marina, and the apartment towers off Bali Way call us because they’ve learned the hard way that a gate company from inland Los Angeles doesn’t account for what the marina’s salt air does to hardware. We see the same failure patterns repeat across the 90292 zip code: hinge posts rotting from the base up, control boards corroding inside unsealed housings, and slide gate racks pitting until the teeth skip. When you call, you’ll talk to a person who can tell you what’s actually wrong and what it’ll cost to fix it. Every job is covered by our 90-Day Done Right Promise, in writing. $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Marina del Rey is unincorporated LA County, which throws a wrinkle a lot of contractors miss. Gate electrical and structural permits route through the LA County Department of Public Works, not LADBS. Companies that mostly work Culver City or Santa Monica often file with the wrong agency, and the project stalls while paperwork gets sorted. We pull county permits from the start. It’s a small thing that saves weeks, and it’s the kind of local knowledge that only comes from working this specific patch of coast.
Our Gate Repair Services in Marina del Rey
The salt air off the harbor touches every part of a gate. Our Gate Repair team handles the job from the hinge post to the control board, and we fix rather than replace whenever the metal’s sound. Here’s what we do most in Marina del Rey:
Electric Gate Repair
Electronic gates around the marina live in a constant bath of moist, salty air, and sealed housings only do so much. When a board fails, the gate either won’t move or moves erratically. We diagnose and repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we carry marine-rated replacement boards and sealed connectors on the truck for common failures.
Automatic Gate Repair
Automatic gates take the worst of the coastal corrosion because the moving parts are always exposed. Slide gates run on racks where salt pits the teeth and causes jerky motion. Swing operators wear through hinges faster than inland. We repair and realign the full mechanism, not just the symptom, so the gate cycles smoothly again.
Hinge & Post Repair
This is the repair we do more than any other in Marina del Rey. The salt air gets into the base of a hinge post, creates an electrolytic reaction, and the post rots from the inside out. The gate sags, the latch lets go, and the whole panel looks wrecked when the real problem is below ground. We weld on site, cut out the rotted section, and set new posts with stainless fixings that are meant for the coast.
Gate Realignment
After months of sagging or grinding, a gate’s geometry drifts. Hinges spread, posts lean, and the latch no longer lines up. We bring the frame back to square, reset the posts, and re-hang the panel so it closes without dragging on the concrete or slamming into the stop. The fix holds because we address the cause, not just the noise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marina del Rey
We service and stock parts for the brands Marina del Rey property managers actually run: FAAC, Linear, and BFT among them. Our shop carries common boards, hinges, loop detectors, and safety edge components for these systems, which means we don’t wait a week for a part to ship before we can finish your repair. We’re certified to work on nine major gate brands, and welded-in-marin repair is the same job whether it’s a Viking swing operator or a DoorKing slide unit. The gate stays in your driveway.
Common Gate Repair Problems We See in Marina del Rey Homes
- Hinge post rot from the inside out. Salt air slips into the base of a painted steel post and eats it where you can’t see it. The gate sags, and then the welds crack trying to hold the weight. New stainless post anchors and galvanised steel are the fix that lasts on the coast.
- Control board failure from trapped moisture. The marine layer keeps everything damp, and unsealed operator housings collect that moisture. Boards short and gates stop or move on their own. We replace boards with sealed units and add drainage where the housing allows it.
- Slide gate rack pitting and jerky travel. Corrosion pits the rack and pinion teeth on slide gates around the marina, so the gate stutters and lurches, especially near the end of travel. We replace the worn rack segment and re-time the operator.
- Welds cracking at the gate corners. Gates flex in the wind off the water, and old welds fatigue. We repair and reinforce them on site with proper welding, not bolt-on plates that hide the problem.
Pricing for Gate Repair in Marina del Rey, CA
A typical gate repair in Marina del Rey runs $180-$340 for hinge adjustment, realignment, or a seized latch replacement. Electric operator repairs, including board swaps or capacitor work, typically land between $250 and $550 depending on the model and whether we’re replacing the board or the whole head unit. Hinge post replacement with welding and concrete work ranges from $600 to $1,400 depending on how deep the rot goes. The price is quoted and agreed before any work starts, and estimates are free. Call (323) 677-4063 to have us look at the gate in person.
We Also Serve Cities Near Marina del Rey
Our crews work Marina del Rey regularly, and we’re also close by for gate repair in Culver City, Santa Monica, Beverly Hills, and West Hollywood. If you’re in one of those areas and the gate’s not cooperating, call the shop and we’ll get you on the schedule.
Serving Marina del Rey, CA - Our Local Coverage Area
We’re based in the Marina del Rey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Marina del Rey
Open-water salt air. Marina del Rey sits surrounded by marina channels, and that salt-laden air accelerates oxidation of iron, steel, and aluminum hardware measurably faster than in neighborhoods even a mile inland. Hinges aren’t just wearing out; they’re corroding from the surface inward, and stainless-steel replacements are the only thing that holds up. Call (323) 677-4063 and we’ll tell you if your hinges can be saved or need a proper marine-grade swap.
Yes, in most cases. Marina del Rey is unincorporated LA County, so gate electrical and structural permits route through LA County Department of Public Works, not LADBS. We pull the right permit from the start so the job doesn’t stall halfway through. Call (323) 677-4063 and we’ll check the specific scope for your gate.
It’s almost always a corroded rack and pinion, or a failing loop detector. Salt air pits the teeth on the slide rack, so the pinion can’t get a clean bite and the gate stutters, especially under load near the limit switch. We replace the worn rack segment or the detector, and the gate cycles smoothly again. Call (323) 677-4063 for a free estimate.
Yes, and we do it constantly in Marina del Rey. The sag usually comes from a rotted hinge post, not a bad panel. We cut out the rotted post, weld in a replacement, and re-hang the panel with stainless fixings. The panel stays. Call (323) 677-4063 and we’ll tell you exactly what your gate needs after we see it.
Marine-rated components and sealed boards. The marine layer traps moisture against operators here, so standard inland boards fail early. Look for a manufacturer that offers a sealed housing and corrosion-resistant internals, especially if the gate is within sight of the water. Call (323) 677-4063 if you want a brand recommendation based on what’s been lasting on this coast.
Call for Honest Gate Repair in Marina del Rey
If your gate is grinding, sagging, or dead in the driveway, call (323) 677-4063. A live person answers, we’ll schedule a time that works, and you’ll get a straight price before any work begins. The name is on the shop, and we’ve been at it since 2001. That’s the oldest kind of accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marina del Rey since 2001.