Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Beverly Hills
If you live in Beverly Hills and your ornamental gate is sagging, grinding, or refusing to close, the fix usually starts with the right part welded in the right place. Gate repair here is not a one-size-fits-all job. A hinge on a 1930s Spanish Colonial pilaster in the flats needs a completely different approach than a slide-gate rack on an 18% Trousdale grade. Our Gate Parts & Welding crew does the work on site, in your driveway, so the gate never leaves your property. Call (323) 677-4063 and you will get Hal or someone on his crew, not a phone tree.
We have been fixing gates since 2001, and we answer the phone around the clock. That matters in Beverly Hills, where the gate is often the first thing a guest sees and the last thing between you and Sunset Boulevard traffic.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. He has been at this since 2001, and the address is published. That is the oldest accountability there is. When we take a gate repair in Beverly Hills, the person who shows up is background-checked, uniformed, and certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. More importantly, the person who shows up has probably welded a gate on your street before.
Beverly Hills homeowners tend to ask the same question first: will this actually hold up? We put the 90-Day Done Right Promise in writing on every job. If it is not done right, one call brings Hal back. No runaround, no fine print. We also offer a $40 discount on any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. The price is quoted and agreed before any work starts. Always.
One thing you should know about working in Beverly Hills: the city has its own Building & Safety Department, separate from the City of Los Angeles. That means a permit for gate automation or structural modification goes through Beverly Hills City Hall. Out-of-area contractors miss this constantly. We do not, because we deal with it every week.
Our Gate Parts & Welding Services in Beverly Hills
We repair what other companies want to replace. That is the whole philosophy. Here is what that looks like in Beverly Hills specifically.
Hinge Replacement
Wrought-iron hinges on Beverly Hills estate gates do not fail in the middle. They fail where the hinge post meets the original brick or stone pilaster. We cut out the corroded section, weld a new hinge strap to match the original pattern, and anchor it so the masonry does not crack. On 1920s Spanish Colonial gates, matching the original scrollwork matters. Nobody wants a Home Depot hinge bolted onto a 90-year-old gate.
Post Replacement
A sagging gate is almost always a post problem. The gate sags in the hinge post, not in the middle, and that is where we start. In the flats south of Santa Monica Boulevard, posts are often set into original brick pilasters. Standard surface-mount replacements crack the masonry. We core-drill, set a new steel post, and weld the hinge assembly to it. Fix the panel without the post and you will fix it twice.
Rail Repair
Slide gates in Beverly Hills take abuse. On Trousdale and the hillside streets north of Sunset, driveways commonly slope 15 to 20 percent. A rail that is bent or a rack that is stripped on that grade means the gate hesitates, then grinds, then stops. We straighten, weld, or replace the rail and re-set the rollers so the gate tracks clean. This is not a parts-swap job. It is measuring, fitting, and welding in place.
Custom Welding
This is where we spend the most time in Beverly Hills. Ornamental gates here are often custom work from the 1920s through the 1940s, which means replacement parts are not on a shelf anywhere. We fabricate hinge straps, finials, scroll sections, and latch brackets in the driveway, then finish them to match the surrounding metal. If the original was forged, we forge. If it was cast, we weld and grind to profile. The goal is a repair you cannot spot from three feet away.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
Most Beverly Hills gates are running operators from a handful of manufacturers. We service FAAC, BFT, Linear, and Viking regularly, along with five other major brands. We keep common parts on the truck so a stripped gear or a failed limit switch does not mean a second trip. For older or discontinued models, we fabricate what is needed rather than telling you the gate has to be replaced. If your operator is running hot on a steep Trousdale driveway, we will say so, and we will explain what a grade-compensating brake does.
Common Gate Parts & Welding Problems We See in Beverly Hills Homes
- Corroded hinge posts inside original brick pilasters. Decades of moisture wicks through the masonry and eats the steel from the inside out. By the time the gate sags visibly, the post is usually gone. We core-drill, set a new post, and weld the hinge assembly back to spec.
- Slide-gate operators overheating on Trousdale grades. Many older operators were installed for flat ground, then asked to push a 600-pound gate up an 18% slope. The motor runs hot, strips the rack, and fails prematurely. The fix is a high-torque operator and a grade-compensating brake bracket.
- Powder-coat failure from year-round UV. Beverly Hills gets intense sun without the marine-layer overcast that spares coastal cities. Powder coat breaks down, welds rust underneath, and the gate looks tired before anyone notices the structural problem forming.
- Santa Ana wind damage on large ornamental swing gates. Sudden lateral gusts bend hinges and strip operator gears on gates that are already heavy by design. We see it every fall. The repair is often hinge work plus a gear replacement, done the same visit.
Pricing for Gate Parts & Welding in Beverly Hills, CA
You should know what to expect before you call. Here are honest ranges for Beverly Hills work.
- Hinge replacement: $220-$450 per hinge, including welding and finish-matching. A full gate that needs both hinges re-set typically lands between $600 and $1,100.
- Post replacement in existing brick or stone pilaster: $800-$1,800, depending on core-drilling depth and whether we need to match ornamental caps.
- Rail repair or replacement on a slide gate: $350-$950 for straightening and re-welding; full rail replacement with new rollers runs $1,200-$2,400 on a typical Beverly Hills driveway.
- Custom welding and ornamental fabrication: $150-$400 for small pieces (finials, scroll repairs, latch brackets). Larger custom sections run $500-$1,500 depending on profile complexity.
Every price is quoted and agreed before work starts. You do not find out the real number when the invoice arrives. Call (323) 677-4063 for a free estimate. If you already have a written estimate from another company, we will give you a free second opinion.
We Also Serve Cities Near Beverly Hills
We work throughout the Westside and the Valley, including Beverly Hills, West Hollywood, Studio City, Culver City, and Sherman Oaks. Scheduling is coordinated from our Los Angeles office, and crews serve Beverly Hills locally, so response time is measured in hours, not days. If you are just outside city limits, call anyway. We are probably already working a few blocks from you.
The Beverly Hills Approval Reality: HOAs, City Hall, and Your Gate
If you own a gate in Beverly Hills, you probably have two bosses: your HOA and the City of Beverly Hills Building & Safety Department. Both can stop a gate repair in its tracks. Here is what we have learned from doing this work here for years.
Because Beverly Hills is an independent municipality, any gate modification or new operator installation must go through Beverly Hills City Hall. That is not a suggestion. Structural changes touching original 1920s-1940s pilasters almost always trigger the city’s architectural review process. Out-of-area contractors quote the job, show up, start cutting, and then get a stop-work order because they never pulled the permit. We pull the permit before we touch metal. It adds a few days to the timeline and a line item to the quote. It also means the job gets finished.
Many Beverly Hills neighborhoods also have HOAs with their own requirements for gate style, height, and finish. A new gate roller or welded repair that changes the look of the gate often needs HOA sign-off. We coordinate with the management company directly. On a recent Trousdale Estates job, our crew replaced a stripped rack and pinion on a custom slide gate that had been specified for flat ground. We welded a new grade-compensating brake bracket, upgraded the operator to a high-torque LiftMaster, and re-anchored the post footing into the hillside. Then we coordinated the final inspection with the HOA’s management company so the owner did not have to chase paperwork. That is the job.
For shared entry systems in gated communities, the approval path gets longer: the management company, the HOA board, sometimes the city. We have sat through enough of those meetings to know what the board is going to ask. Bring the spec, bring the finish sample, bring the load calculation for the operator. We will hand you all three before the meeting.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Beverly Hills
Yes, in most cases. Because Beverly Hills has its own Building & Safety Department, any structural modification to a gate, including post replacement and many hinge repairs that touch original brick or stone pilasters, goes through Beverly Hills City Hall. Simple bolt-on part swaps usually do not, but if we are cutting into masonry or changing the post structure, we pull the permit before work starts. Call (323) 677-4063 and we will tell you over the phone whether your specific job needs one. Estimates are free.
Because it was likely installed for flat ground and then asked to push a heavy gate up a 15 to 20 percent grade. The motor overheats, the rack wears unevenly, and the gears strip. The proper fix is a high-torque operator paired with a grade-compensating brake bracket, plus re-setting the rail and rollers so the gate does not fight the grade. We do this repair regularly on Trousdale driveways. Call (323) 677-4063 and we will take a look.
Yes. We weld custom hinge straps and scroll sections to match the original profile, then finish them so the repair blends. It is not a catalog part. It is fabricated in your driveway, ground to shape, and primed and painted to match. If you have a photo of the gate from years ago, that helps us match the original design even if the piece is too far gone to copy directly.
Start with your HOA’s architectural guidelines. Most Beverly Hills HOAs require a written request describing the repair, the materials, and the finish. For welded repairs that change the look of the gate, include photos and a finish sample. We help you prepare the submittal and will talk to the HOA board or management company directly if they have questions. The approval path is usually weeks, not months, but it depends on the association’s calendar.
The hinge post is almost always the culprit. On flat-land Beverly Hills estates from the 1920s and 1930s, the post is often set into a brick or stone pilaster, and corrosion builds where the steel meets the masonry. The post shifts, the gate drops, and the bottom rail scrapes. The repair is a new post or hinge re-setting, welded in place and anchored without cracking the pilaster. It is not a quick shim job. Call (323) 677-4063 and we will diagnose it properly.
Call Gatewood Fence & Gate for Gate Parts & Welding in Beverly Hills
If your gate is sagging, grinding, or stuck open, call (323) 677-4063. You will talk to a person. We will give you a straight answer about what is wrong, what it costs, and whether you need a permit or HOA sign-off. Hal Gatewood has been fixing gates since 2001, and his name is on the shop. The quote you get is the price you pay. The 90-Day Done Right Promise means if it is not right, we make it right. Call today and get the gate closing the way it should.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.