Gate Repair in Los Angeles - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Los Angeles

Gate repair in Los Angeles usually costs $180-$340 for a typical service call, and most repairs are completed same-day when we’re already in your neighborhood. If your gate sags, binds, or stops responding in Los Angeles, the problem is almost never the panel itself, it’s the post, the hinges, or an operator that was undersized for the weight of the leaf. We’re Gatewood Fence & Gate, and we’ve been fixing gates the right way since 2001. Call (323) 677-4063 and a live person answers, any hour, any day.

Call (323) 677-4063

What makes Los Angeles gate repair different from anywhere else is the weight and the grade. Heavy custom wrought-iron gates on hillside properties don’t fail the way a light aluminum gate fails on a flat lot in the Valley. They tear hinge posts out of plumb, they overload operators spec’d for half their actual weight, and they bind against slopes that shift every time it rains. That’s the work we do every week. Our Gate Repair team carries welding gear in the truck, so the gate stays in your driveway and gets fixed where it hangs, not hauled off to some shop across town.

Why Gatewood Fence & Gate Is Los Angeles’s Preferred Gate Repair Company

Hal Gatewood put his name on this company in 2001, and his address is published. That’s not a marketing line. If a repair isn’t right, you know where to find him. Every job, from a simple hinge replacement in Culver City to a full post reset in Bel Air, carries the 90-Day Done Right Promise in writing. One call brings him back. No runaround, no “that’s normal wear.” If it’s not done right, we make it right.

We answer the phone with a live person around the clock. That matters when your gate won’t open at 6 a.m. and you’re already late for work, or when it won’t close at midnight and your driveway is wide open to the street. No voicemail tree, no central booking line three states away. You call, someone local picks up, and we tell you honestly whether you need a service call or a simple adjustment you can make yourself.

We serve Los Angeles from our Los Angeles office, so scheduling is straightforward and our trucks are already on your roads. West Hollywood, Beverly Hills, Marina del Rey, Culver City, and everywhere in between. If you’re in the city, we’re close. And because we’re Gate Repair in Los Angeles specialists rather than a general handyman service, we’re familiar with the specific failure patterns that show up on LA properties, from coastal corrosion to hillside post shift.

Our Gate Repair Services in Los Angeles

Electric Gate Repair

When an electric gate in Los Angeles stops responding, the first thing we check is whether the operator is properly matched to the gate’s weight. In neighborhoods like Bel Air and Benedict Canyon, we regularly find 400 to 600 pound custom wrought-iron leaves hung on operators rated for standard residential use. The motor never had a chance. We diagnose the actual cause, re-spec the operator if needed, and repair rather than replace whenever the existing hardware is salvageable. A typical electric gate repair in Los Angeles runs $220-$450 depending on what’s failed.

Automatic Gate Repair

Automatic gate systems in Los Angeles fail for predictable reasons. Safety photocells get dirty or knocked out of alignment. Limit switches wear out. Circuit boards corrode in the marine layer. And in hillside neighborhoods, constant load from an improperly balanced gate burns out motors years before their rated life. We service all of it, including solar-powered openers in canyon areas where running mains power isn’t practical. If your gate opens halfway and stops, that’s almost always a sensor or limit issue, and we can usually have it resolved same-day.

Hinge & Post Repair

Here’s the thing most people don’t realize: a gate sags in the hinge post, not in the middle of the panel. You can straighten the panel, weld in a brace, or adjust the hinges all day, but if the post has shifted, the gate will bind again. We reset posts with proper footings, replace worn hinge pins, and weld cracked weldments on site. In Los Angeles, the freeze-thaw cycle isn’t the problem; the heavy rain that saturates hillside soil is. When the ground shifts, the post moves, and the gate follows it. Fix the post first and the gate holds square.

Gate Realignment

Hillside properties in Los Angeles, particularly in Hollywood Hills, Laurel Canyon, and Silver Lake, often have driveways on grades of 10 to 20 percent. A swing gate on a slope like that has to fight gravity every single cycle. If the frame is even slightly out of square, the gate binds at the latch or drags at the bottom corner. Realignment means adjusting the frame, re-hanging the leaves, and often rebalancing the operator so it isn’t fighting the grade. Done properly, the gate swings with one hand. Done wrong, you’ll be calling us back in eight months. We do it once.

Trusted Brands We Service in Los Angeles

We’re certified to service nine major gate brands, and in Los Angeles we see a lot of Mighty Mule, LiftMaster, FAAC, and BFT. That covers most residential and light commercial installs across the city, from Spanish Revival bungalows in Los Feliz to newer estates in the hills. Because we’re local, we keep common parts and operator components in the truck. A circuit board, a set of limit switches, a replacement arm. If your brand is less common, we still source it fast, usually within one to two business days.

Common Gate Repair Problems We See in Los Angeles Homes

Every city has its own gate repair fingerprint. After 29 years of doing this work, here’s what Los Angeles actually looks like in the field:

• Overloaded operators on heavy custom gates. Homeowners in Bel Air and along Mulholland Drive install gorgeous 500-pound wrought-iron gates, often through a landscaper or general contractor, and hang them on operators spec’d for half that weight. The motor works itself to death every two to three years. We re-spec the operator for the real leaf weight and set it up to last.
• Coastal corrosion west of the 405. The marine layer in Venice, Santa Monica, and Pacific Palisades carries salt air that eats hinge pins, motor housings, and control boards. Inland neighborhoods don’t see this failure pattern. Coastal gates need corrosion-resistant hardware and more frequent hinge service.
• Post shift after heavy rain. Atmospheric-river storms saturate hillside soil, and even well-installed gate posts move. Hollywood Hills, Laurel Canyon, Silver Lake, anywhere on a grade. After a wet winter, binding and sagging spike. That’s the season to check your post footings.
• Fire-code compliance gaps. In Los Angeles, a large share of automated driveway gates sit inside Very High Fire Hazard Severity Zones. LA County Fire Code requires an approved emergency-responder override, usually a Knox Box or equivalent key switch. We check that override as part of any repair on those properties. It’s not optional, and it’s not something a general handyman will flag.

Pricing for Gate Repair in Los Angeles, CA

We Also Serve Cities Near Los Angeles

If you’re in Culver City, West Hollywood, Beverly Hills, or Marina del Rey, you’re still inside our normal service radius. We schedule Los Angeles and the surrounding communities together, which keeps drive time short and response times fast. Same local crew, same 90-Day Done Right Promise, same published pricing.

FAQs - Gate Repair in Los Angeles