Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across West Hollywood
If you manage or own a building in West Hollywood, you already know the math: one gate serving 10 to 50 residents fails faster than any single-family gate ever will. And when it does, every hour it’s stuck open or jammed shut is an hour someone can’t park, can’t get their deliveries, and can’t feel safe. Gatewood Fence & Gate does gate installation in West Hollywood with that reality in mind, not as an afterthought. We’ve been owner-operated since 2001, Hal Gatewood’s name is on the shop, and we build and install gates that survive the abuse this city’s mid-century apartment stock dishes out daily. Call (323) 677-4063 and you’ll get a live person, any hour, who actually knows West Hollywood’s buildings, permits, and problem gates.
Why Gatewood Fence & Gate Is West Hollywood’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001 and never left, which means the person quoting your job is the same person who stands behind it when something goes wrong. That matters in West Hollywood, where property managers burn through contractors who quote low, disappear mid-project, and leave a 30-unit building without a working gate for a week. We don’t do that. The 90-Day Done Right Promise is printed on every invoice we hand you: if it’s not done right, one call brings us back, no runaround. Not “up to” 90 days. Ninety days, plain as that.
West Hollywood’s housing stock is almost entirely mid-century multi-family construction: courtyard apartments, bungalow courts, and 2-4 story buildings from the 1940s through the 1970s. Most still run their original mild steel or wrought iron gates on concrete or brick pilasters that are decades past replacement age. Our crews know these buildings because we have crawled through, measured, and repaired dozens of them. When a gate sags in the hinge post, not in the middle, we start at the post. Fix the panel without the post and you’ll fix it twice. That’s not a slogan. That’s 24 years in this specific building stock.
Calls are answered by a live person, 24/7, not a voicemail queue and not someone reading a script in another state. If you’re off Santa Monica Boulevard or up in the Norma Triangle and your gate operator died at 9pm, you’ll talk to a human who can actually help. Background-checked, uniformed people show up in the window we give you. Not a window “sometime today.” An actual time.
Our Gate Installation Services in West Hollywood
We handle the full scope of Gate Installation work across West Hollywood, from single pedestrian gates on bungalow courts to heavy double swing gates on 1960s apartment parking entries. Every job starts with a real site visit, a real measurement, and a written price agreed before work begins. Free estimates, always.
Driveway Gate Installation
West Hollywood driveway gates are, more often than not, multi-tenant workhorses. You’re not installing a decorative gate for a two-car family home. You’re installing the only barrier between the street and a 20-unit courtyard parking area, and that means the gate has to cycle hundreds of times a day without complaint. We spec operators and hardware for that duty cycle, not for the brochure number. A proper driveway gate install in West Hollywood means reinforced posts, quality hinges sized for the panel weight, and an operator that won’t burn out in 14 months.
Pedestrian Gate Installation
Pedestrian gates on West Hollywood’s bungalow courts and courtyard buildings get ignored until the closer fails and the gate starts slamming against the frame at 2am. We install pedestrian gates with closers rated for heavy daily use, latches that actually align, and post anchors that don’t loosen in crumbling mid-century masonry. We’ll also match the ironwork to existing original gates so the new panel doesn’t look like an afterthought bolted onto a 1962 building.
Sliding Gate Installation
Where side clearance exists along a property line near the Sunset Strip or off Melrose, a sliding gate is the right call. Sliding gates eliminate the swing-arc clearance problem entirely, which matters when a parking lot is tight against the sidewalk and an inward-swinging gate would block cars. We install cantilever and track-style sliding gates with proper entrapment protection: photocells, contact edges, and the warning signage West Hollywood Building & Safety wants to see. A sliding gate for an apartment lot isn’t a weekend project, but it’s also not something to defer once the old one has destroyed its rollers for the third time.
Swing Gate Installation
The swing gate is the default for West Hollywood’s mid-century buildings: double swing gates on brick pilasters, single swing pedestrian gates on steel posts set in concrete. We pour new post footings when the original pilaster has cracked from years of hinge-post torque, fabricate matching ornamental steel on site, and install operators sized for the actual panel weight plus years of use. Underground operators for heavy ornamental gates are a specialty here; we’ve done them on bungalow courts off Fountain and on apartment buildings in the Norma Triangle, and they run silent, which matters when the gate is ten feet from someone’s bedroom window.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We’re certified to service nine major gate brands, and in West Hollywood specifically we end up working most often with LiftMaster, FAAC, and BFT operator systems on multi-tenant buildings. For older apartment gates with legacy controllers, we regularly repair and upgrade Mighty Mule and Ghost Controls units when full replacement isn’t needed. Having spare parts for these brands on the truck means a one-trip fix instead of a “we’ll be back next week” story that leaves a 30-unit building running on a chain and padlock. When the job calls for a new operator, we’ll spec what actually fits your panels, your duty cycle, and your access control, not whatever is in the clearance bin.
Common Gate Installation Problems We See in West Hollywood Homes
- Hinge bolts sheared clean off. Original mild steel gates on 1940s-1970s courtyard apartments run through hundreds of cycles daily, and the hinge bolts eventually fatigue and shear. The gate sags into the latch post, the hinge post takes rotational torque it was never built for, and the brick pilaster starts cracking under the load. We replace the hinge hardware and, when needed, rebuild the post footing before hanging a gate that weighs half a ton.
- Rust at weld joints from marine-layer moisture. West Hollywood’s coastal marine layer delivers salt-laden morning moisture that settles into every bare iron weld joint and pits the surface fast. The older uncoated wrought iron on mid-century buildings is especially vulnerable. We media-blast, prime, and coat before welding on new sections, and we fabricate repairs that won’t rust through in three seasons.
- Legacy swing operators burning out motors. On older West Hollywood apartment buildings, the loop detectors embedded in the pavement have often been crushed by decades of vehicle traffic, so the operator no longer knows when a car is on the loop. The motor runs against a stalled gate, overheats, and dies. Owners then face an emergency full-system replacement with no time to think about ADA clearance or permit compliance, which is precisely when a city code surprise hits.
- Pilasters that don’t meet current setback or clearance codes. Apartment owners in West Hollywood often discover mid-project that their 1960s pilasters sit too close to the sidewalk or don’t provide the ADA clearance the city now wants for a new automatic operator. We flag this on the first site visit, before any steel gets ordered, so the plan accounts for it rather than stalling at inspection.
Pricing for Gate Installation in West Hollywood, CA
Because most gate work in West Hollywood is multi-tenant and code-regulated, pricing runs higher than the single-family gate jobs we see in adjacent Beverly Hills, but the numbers are still predictable once you know the scope. A straightforward pedestrian gate install on a bungalow court in West Hollywood typically runs $900-$2,400 including the gate, hardware, and post work. A single swing driveway gate with a new operator runs about $3,800-$6,500. A double swing gate for an apartment parking entry, including reinforced footings, two panels, a LiftMaster or FAAC operator, and entrapment protection, runs $7,500-$14,000 depending on panel weight, ornamental work, and access control integration. Underground operator systems add $1,800-$3,500. Sliding gate installs run $9,000-$18,000 for a full system with track, operator, and safety edges. The price is quoted and agreed before any work starts, in writing, and it does not change at the door. Our estimate is free, and we’ll give you the number plain so you can sleep on it.
- Pedestrian gate install: $900 - $2,400
- Single swing driveway gate with operator: $3,800 - $6,500
- Double swing gate for apartment entry: $7,500 - $14,000
- Underground operator system: add $1,800 - $3,500
- Full sliding gate system: $9,000 - $18,000
We also run honest standing offers that don’t require haggling: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
We Also Serve Cities Near West Hollywood
Our crews work the whole corridor around West Hollywood: Beverly Hills, Studio City, North Hollywood, and Sherman Oaks. If you manage property in one of those cities or across the county line, the same owner-operated crew that installs gates in West Hollywood will come out, measure, quote, and build it right. Call (323) 677-4063 and we’ll tell you straight whether we can get to you this week, not sometime this month.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in West Hollywood
Yes, West Hollywood Building & Safety enforces its own permitting process for automatic gate operator installations, separate from the City of LA, and we see contractors get surprised by this constantly. If you’re adding a new operator to an existing gate, you’ll need the city to sign off on the operator, the entrapment protection, and the clearance requirements. On a mid-century building, the most common wrinkle is that the original pilasters don’t meet current setback or ADA-clearance requirements, which means the permit path has to account for post relocation or pilaster rebuild before the operator gets installed. Call (323) 677-4063 for a straight answer on whether your project needs a permit, and what it’ll take to pass.
Duty cycle, plain and simple. A single-family gate in Beverly Hills might open six to ten times a day; a courtyard apartment gate in West Hollywood might cycle 100 times a day or more, because every resident, every delivery, every rideshare, and every guest is using the same gate. That’s ten times the hinge fatigue, ten times the operator motor wear, and ten times the abuse on the latch and loop detector. The original mild steel hardware on West Hollywood’s 1940s-1970s buildings simply was never spec’d for that load, so parts fail sooner. Call (323) 677-4063 and we’ll spec new hardware for the duty cycle you actually have, not the one the original builder hoped for.
Yes, and we’ve done it on bungalow courts off Fountain and throughout West Hollywood. Underground operators for heavy ornamental gates are a specialty of ours: the operator sits below grade, the gate panel keeps its clean ornamental look, and there’s no visible arm or box to clutter the entry. The catch is the concrete work: you need a properly sized foundation box, correct drainage so it doesn’t sit in water, and an operator rated for the actual panel weight. On a 1940s bungalow court, that often means removing the old post, pouring a new footing, and running conduit for the operator and safety photocells. Call (323) 677-4063 for a free site visit and a written price.
West Hollywood follows current standards for gate entrapment protection, which means a new sliding gate on an apartment parking lot needs photocells across the gate opening, contact-sensitive edges on the leading and trailing edges of the panel, and audible and visual warning signs posted at the gate. The city’s plan check will also want to see that the gate’s operating speed, force, and reversal function meet safety minimums. We install these systems as part of every sliding gate job, and we test the reversal function with a force gauge, not just a hand wave. Call (323) 677-4063 for an exact quote on a compliant sliding gate install.
We fabricate on site, which is the only way to match original 1960s ornamental ironwork without producing something that looks like a catalog gate bolted onto a classic building. We take a section of the original iron as reference, match the scrollwork or spear patterns, cut and shape the steel on site, and weld it into place so the new panel reads as part of the same building. The repair stays in the driveway, not hauled off to a shop across town. If you’re replacing one half of a double swing gate, the goal is that a neighbor who’s lived there since 1972 can’t tell which side is new. Call (323) 677-4063 for an estimate; we’ll come look at the original ironwork and tell you what’s feasible before any steel gets ordered.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood since day one with the 90-Day Done Right Promise.