Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Los Feliz
Gate repair in Los Feliz usually costs between $160 and $480 for most hinge, post, opener, and realignment jobs, and in many cases we can be out to your property the same day you call. Older hillside homes here don’t fail the way a flat-lot track house gate fails. We come out, look at the whole system, and tell you honestly what’s worth fixing and what’s past saving.
We’ve worked on gates from Vermont Avenue up through the hills above Los Feliz Boulevard for years, and the fix usually starts at the post, not the opener. Call (323) 677-4063 for a straight answer and a free estimate that won’t change between the phone and the driveway.
Why Gatewood Fence & Gate Is Los Feliz’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, and the shop is local. We’ve been owner-operated since 2001, and the person who answers your call is the same person who will stand in your driveway and tell you what’s actually wrong. Our published address and license number are there for you to look up, because we don’t hide behind a brand. A live person answers the phone 24/7, including at 2 a.m. when a Santa Ana gust just blew your gate off its hinges.
Los Feliz customers call us because we fix what other companies want to replace. We weld on site. If your original 1938 wrought iron gate is sagging, we don’t quote you a new aluminum panel and a pat on the back. We assess the pilaster, the hinge pockets, the post base, and the geometry of the driveway slope before we touch anything. The 90-Day Done Right Promise is on every invoice in writing. If it’s not done right, one call brings Hal back. No runaround.
We also stock parts locally for the brands these old gates run on, so we’re not waiting on a warehouse three states away. Response time to Los Feliz is typically same-day for urgent failures, and we carry trip-charge-free service inside the county. Our crews are background-checked and wear uniforms, and the job is quoted and agreed before any work starts.
Key Takeaways for Los Feliz Homeowners:
- Most gate repairs in Los Feliz we handle run $160-$480
- Same-day and 24/7 emergency response to Los Feliz is available
- We repair and preserve original wrought iron, we don’t default to replacement
- Every job carries our 90-Day Done Right Promise in writing
- Free estimates, no trip charge inside the county, $40 off any repair over $200
Our Gate Repair Services in Los Feliz
We handle the full range of Gate Repair work on the hills, the flats, and everywhere in between. Here’s what we do most often in this neighborhood, and how the local housing stock shifts the job.
Electric Gate Repair
Los Feliz has hundreds of electric gates that were installed before entrapment-safety enforcement got serious in the 1990s and early 2000s. Many of them run on obsolete control boards that nobody stocks anymore, which means we either source a compatible replacement or assess honestly whether a new UL-325 compliant operator is the safer, cheaper long-term answer. We service LiftMaster, DoorKing, FAAC, BFT, and the rest. When an opener fails on a sloped driveway on Glendower or Aberdeen, we also check the load the motor is pulling. A gate that’s binding because its post drifted two inches out of plumb will eat a brand new operator in under a year.

Automatic Gate Repair
Automatic gates on Los Feliz hillsides get hammered by wind and gravity in ways flat neighborhoods never see. Santa Anas funnel down from Griffith Park and grab a solid wrought iron leaf like a sail. We replace bent knuckle arms, stripped gears, blown limit switches, and misaligned photocells, but we also look for the reason the system failed, not just the part that broke. Otherwise you’re paying twice for the same failure six months later. Every automatic gate repair starts with the question: what moved, and why?

Hinge & Post Repair
This is the real specialty for Los Feliz. Those 1920s and 1930s Spanish Colonial Revival homes on streets like Glendower and Los Feliz Boulevard have stucco pilasters that have been settling for decades. When the post tilts, the hinge pockets crack, the gate drags on the latch side, and no amount of hinge replacement fixes it. We remove the gate, pour new post footings with deep rebar anchors, weld matching forged hinge barrels onto the original iron, and reset the geometry so the gate swings without fighting the slope. Fix the panel without the post and you’ll fix it twice.

Gate Realignment
A gate sags in the hinge post, not in the middle. When we see a Los Feliz gate dragging a crescent scratch in the driveway, we don’t shim the latch and call it done. We measure the post with a level, correct the lean with structural work, then remount and adjust the hinges so the reveal is even and the gate closes without spring-back or drag. Realignment on a hillside driveway almost always involves some post correction, because the ground has been moving since the Coolidge administration. We also handle lock repair and partial weld-and-reinforce jobs where the hinges have wallowed out their screw holes or rust has compromised a weld joint.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Feliz
We’re certified to work on nine major gate brands, and we keep local parts stock for the ones we see most often in Los Feliz: LiftMaster, Mighty Mule, FAAC, and BFT. Older homes skew toward FAAC and BFT on the original installs, with a lot of LiftMaster retrofits from the 2000s. We know which control boards are still available and which ones are orphaned, and we won’t sell you a bodge job when the honest answer is a new board. We service DoorKing, Linear, Viking, Ghost Controls, and Elite as well, but the Los Feliz legacy stock is where the expertise matters most.
Common Gate Repair Problems We See in Los Feliz Homes
- Shifted pilasters on sloped driveways - Decades of soil creep below hillside streets like Glendower and Aberdeen slowly tilt stucco pilasters out of plumb, cracking hinge pockets and motor mounts. The gate then binds, drags, and destroys whichever part is most expensive.
- Santa Ana wind damage to swing gates - Exposed gates catch fall wind gusts funneling down from Griffith Park and transfer all that force into hinge pins, knuckle arms, and gear teeth. We see a spike in bent arms and stripped operators every October and November.
- Rust on original 1930s ironwork - Los Feliz’s dry season dehydrates uncoated wrought iron, and the original pieces never had modern powder-coat protection. Hinge pins corrode from the inside, weld joints fatigue, and gates snap under load. This is repairable, but it requires welding and fabrication, not a can of spray paint.
- Non-compliant automatic gates on legacy installs - Many hillside properties still run pre-1993 operators without proper photoelectric sensors, reversing edges, or compliant control boards. The mechanical repair is often straightforward, but we have a code conversation with you before we put our name on a system that could injure someone.
Pricing for Gate Repair in Los Feliz, CA
Here’s what you should expect to pay for common repairs in Los Feliz, based on what we actually charge:
| Repair Type | Typical Price Range |
|---|---|
| Hinge & Post Repair (single gate) | $180-$420 |
| Gate Realignment | $150-$300 |
| Electric Opener Repair (board, arm, or limit switch) | $190-$480 |
| Weld & Rust Repair (per section) | $120-$350 |
| Lock Repair | $90-$220 |
These ranges assume the gate is on a standard residential driveway. Heavier vintage iron, badly shifted pilasters requiring new footings, or operators needing full control-board replacement push toward the upper end. You’ll know the exact price before any work begins, and it does not change when the invoice arrives. We also offer a free second opinion on any written estimate you bring us, plus a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Los Feliz
While this page is about Gate Repair in Los Feliz, our crews regularly run over to West Hollywood, Los Angeles, Santa Monica, and Sherman Oaks. We know the differences between each housing stock, and we won’t treat a Sherman Oaks mid-century gate like a Glendower Avenue Spanish Colonial. If you’re a few miles outside the neighborhood line, give us a call and we’ll tell you straight whether we cover your street.
Serving Los Feliz, CA - Our Local Coverage Area
We’re based in the Los Feliz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Los Feliz
Because the hinge post is moving, not the hinges. Hillside soil creep under streets like Glendower and Los Feliz Boulevard slowly tips your stucco pilaster out of plumb, and every year it tilts a little more. New hinges on a leaning post just relocate the sag. The real fix is removing the gate, correcting the post with new footings and anchors, and then remounting everything on a stable base. That’s the only repair that outlasts the next rainy season. Call (323) 677-4063 and we’ll come measure the actual lean.
Usually yes, if the post system is sound and the gate’s geometry allows for a clean operator mount on your sloped driveway. We’ve retrofit Mighty Mule and LiftMaster operators onto vintage iron throughout Los Feliz, welding custom brackets to the original frame rather than drilling through decorative forged scrollwork. The gate stays in your driveway, the vintage look stays intact, and the opener does its job. Some very heavy solid-iron gates exceed the torque rating of residential operators, in which case we’ll tell you up front before you spend anything. Estimates are free.
Santa Ana winds funnel down from Griffith Park and hit exposed swing gates like a wind sail. The force bends knuckle arms, strips plastic gear teeth inside the operator, and rips gate leaves off hinges that were already weakened by rust. We recommend wind-rated hinge pins and reinforced brackets for any gate that faces the open slope, and we check gear wear every fall. If your gate slams or shudders during a wind event, shut it off and call us before the operator starts grinding metal.
No, not necessarily. Many Los Feliz hillside homes run pre-1993 automatic gates that predate modern UL-325 entrapment-safety standards. A remote control does not mean the system has functional photocells, reversing edges, or a compliant control board. If a child or pet can get caught in the gate path and the gate will not reverse, that’s a serious hazard. We assess the entire system during any repair and give you a clear, no-pressure code-compliance conversation before we sign off. You decide what you want done.
We grind the affected area down to clean metal, cut out any section that’s structurally compromised, weld in replacement stock that matches the original profile, then prime and paint to blend with the existing patina. Forging-matching original scrollwork takes time and skill, especially on 1920s and 1930s Spanish Colonial Revival pieces. We don’t sandblast and hide rot under paint, and we don’t replace a whole leaf because one hinge pin corroded. The goal is preserving the ironwork you paid for and the look of the house you bought it with.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Los Feliz since the shop opened.





Before
After
Before
After
Before
After