Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Beverly Hills
Gate access control in Beverly Hills means more than swapping a keypad. It means navigating the city’s own Building & Safety Department, because Beverly Hills is an independent municipality with its own permit process, separate from the City of Los Angeles. Every gate access control modification, even a keypad swap on an existing operator, requires a permit through Beverly Hills City Hall. Hal Gatewood has been doing this work since 2001, and we know the drill cold. Call (323) 677-4063 and you’ll get a live person who knows the difference between a Trousdale Estates grade issue and a flats pilaster problem.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Access Control Company
We’re not a franchise rolling through town. The name on the shop is Hal Gatewood, and the address is published. We’ve been owner-operated since 2001, and our customers in Beverly Hills tend to be people who have already been burned once by an outfit that quoted low on the phone and invoiced high at the door. That doesn’t happen with us. The price is quoted and agreed before any work starts, in writing.
Our Gate Access Control team knows what Beverly Hills HOAs will reject before you even submit the application. That is the kind of thing you only learn by doing the work here, year after year. And we stand behind every job with the 90-Day Done Right Promise. Plain words. If it’s not right, one call brings Hal back. No runaround.
We answer the phone 24/7. Not a voicemail, not a call center three states away. A live person who can tell you whether we can be at your gate same day. In Beverly Hills, we usually can.
Our Gate Access Control Services in Beverly Hills
Keypad Entry
A keypad swap in Beverly Hills is never just a keypad swap. The city wants a permit. The HOA often wants architectural review of the housing. And the pilasters on a 1930s Spanish Colonial in the flats south of Santa Monica Boulevard will not accept standard mounting hardware without masonry-specific anchoring. We handle all three. Keypad entry systems in Beverly Hills typically run $350 to $900 installed, depending on whether we are syncing to an existing operator or running new wiring through a gated community’s shared conduit.
Video Intercom
Video intercom on a Beverly Hills estate gate is where HOA architectural boards get picky in a hurry. A modern brushed-metal housing that looks fine on a Trousdale Estates Mid-Century Modern gate will get rejected outright on a 1920s Georgian estate unless it is powder-coated to match the original ironwork. We know this because we’ve sat through those applications. Video intercom systems in Beverly Hills range from $1,200 to $3,500 for a quality setup, with the high end including a camera that handles full-sun glare without washing out the visitor’s face.
Phone Entry
Phone entry systems for gated communities in Beverly Hills are a different animal than a single-home keypad. These systems need to route calls to multiple residents, handle visitor codes that expire, and integrate with whatever directory the management company already uses. We service and install phone entry systems that work with landlines, cell phones, and VoIP. Expect $800 to $2,200 depending on resident count and whether the existing phone line infrastructure is still sound.
Card Reader
Card reader access is common in Beverly Hills condo buildings and gated enclaves where the HOA manages a shared gate. The readers themselves need to survive direct sun, which means the plastic housing on a cheap unit will crack and yellow within two seasons here. We stock UV-rated housings and the brands that hold up, like LiftMaster and FAAC. Card reader installs in Beverly Hills typically run $500 to $1,400 per gate side, plus programming.
Smart Access
Smart access is where most Beverly Hills upgrades are heading. Residents want app-based control from their phone, especially in the hillside neighborhoods north of Sunset where walking to the gate means climbing a steep driveway. The catch is that the HOA and the city both need to sign off, and many older operators were never built for smart integration. We can often retrofit the operator you already have rather than replacing it. Retrofit smart access runs $450 to $1,100. A full replacement operator with smart capability starts around $1,500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We’re certified to service nine major gate brands, and in Beverly Hills the ones we see most are LiftMaster, Mighty Mule, and FAAC. The older estates lean toward LiftMaster and FAAC operators mounted on original ornamental ironwork. The Mid-Century Modern homes in Trousdale Estates often have Mighty Mule units on slide gates. We keep common parts stocked locally, which means we’re not waiting on a warehouse in another state when your gate stops reading key codes. If the part needs custom fabrication, we weld on site and the gate stays in your driveway.
Common Gate Access Control Problems We See in Beverly Hills Homes
- HOA architectural rejections. A homeowner buys a sleek new keypad or video intercom, installs it, and the HOA fines them because the housing clashes with the 1920s-1940s estate style. We’ve seen it dozens of times. The fix is custom powder-coat finishes and asking the board before the hardware goes up.
- Santa Ana wind stress on ornamental swing gates. Those heavy wrought-iron gates are beautiful, but Santa Ana gusts put sudden lateral force on the hinges and strip operator gears. You get intermittent access failures exactly when you need to leave for work. We replace hinges, rebuild gear racks, and set tension so the gate doesn’t fight the wind.
- Trousdale Estates grade failures. Slide-gate operators spec’d for flat ground burn out fast on 15-20% grades. The motor runs hot climbing the incline every cycle. We upgrade to high-torque operators and install a grade-compensating brake so the motor isn’t doing all the work.
- UV-damaged housings and seals. Beverly Hills gets intense year-round sun with no marine layer to soften it like Santa Monica gets. Plastic operator housings crack, rubber seals dry out, powder-coat finishes chalk. We replace with UV-rated components that hold up longer.
Pricing for Gate Access Control in Beverly Hills, CA
Here are straight numbers for the Beverly Hills market. A keypad entry system runs $350 to $900 installed. Phone entry runs $800 to $2,200 depending on resident count. Card readers run $500 to $1,400 per gate side. Video intercom runs $1,200 to $3,500 depending on camera quality and HOA finish requirements. Smart access retrofits run $450 to $1,100 on an existing operator. What moves the number is whether we’re repairing or replacing, whether the HOA requires custom finishes, and whether the existing operator can be integrated or needs to go. Every quote is written and agreed before we start. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (323) 677-4063 and we’ll give you a real number over the phone.
We Also Serve Cities Near Beverly Hills
Our Gate Access Control in Beverly Hills work regularly takes us into West Hollywood, Studio City, Culver City, and Sherman Oaks. If you’re on the edge of Beverly Hills or just over the line, call us. We’ll tell you straight whether the permit runs through Beverly Hills City Hall or the City of Los Angeles, because the answer changes the timeline.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Beverly Hills
Yes. Beverly Hills is an independent municipality with its own Building & Safety Department, and every gate access control modification, even a keypad swap on an existing operator, requires a permit through Beverly Hills City Hall, not Los Angeles. We handle the permit application as part of the job. Call (323) 677-4063 for an exact quote, and we’ll walk you through the timeline before anything gets ordered.
Because Trousdale Estates driveways commonly slope 15-20%, and many older slide-gate operators were spec’d for flat ground. The motor runs hot climbing the incline on every cycle and fails prematurely. We replace those with high-torque operators and install a secondary grade-compensating brake so the motor is not doing all the work. Call (323) 677-4063 and we can diagnose yours same day.
Usually yes, but only if the housing is finished to match your gate’s style. Beverly Hills HOA architectural boards routinely reject modern brushed-metal housings on 1920s-1940s estate gates. We order custom powder-coat finishes in the exact color of your original ironwork and submit the application for you. Call (323) 677-4063 and we’ll give you a straight answer about what your specific HOA will accept.
The answer is a phone entry or smart access system that routes to individual residents, plus a programming plan agreed with the management company. Every resident gets their own code or app access, codes can be set to expire, and the directory stays current. We install and program these systems around Beverly Hills regularly. Call (323) 677-4063 for a free estimate, and we’ll put the resident-count and programming details in writing.
No. A gate sags in the hinge post, not in the middle, and that is where we start. On Beverly Hills estate gates, the original brick or stone pilasters often have loosened masonry anchors over 80 or 90 years, and just welding the panel leaves the post still moving. We rebuild the hinge post anchoring, replace the hinges, and then set the panel so it hangs right. Fix the panel without the post and you’ll fix it twice. Call (323) 677-4063 and we’ll come look at it free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.