Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Van Nuys, CA
Gate repair in Van Nuys generally costs between $180 and $650 depending on whether you’re looking at a hinge, a motor, or a full track rebuild, and most residential jobs are finished the same afternoon once we’re on site. We answer the phone day and night at (323) 677-4063, and because we keep a full truck of gate hardware, welding gear, and opener parts, a lot of Van Nuys repairs never need a second visit. Hal Gatewood has been fixing gates since 2001, and he’ll tell you straight what needs fixing, what doesn’t, and what it should cost before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Van Nuys Homeowners Choose Gatewood Fence & Gate
Most of the calls we get from Van Nuys start the same way: a gate that worked fine for twenty years suddenly won’t budge, or a motor that hums but won’t move the leaf. That’s when homeowners call us for our Gate Motor & Opener in Van Nuys service. Hal shows up, finds the exact point of failure, and fixes it on the spot. We weld in your driveway rather than hauling your gate to some shop across the county. When someone in the Midvale area or over by Van Nuys High School calls about a sagging iron gate, the first thing we check is the hinge post, because a gate sags in the hinge post, not in the middle, and that is where we start. Every job gets the 90-Day Done Right Promise in writing: if it’s not done right, one call brings Hal back, no runaround.
You can also drive to the shop and look Hal in the eye. The name is on the shop, and the shop is down the road, that is the oldest accountability there is. We’re proud to say a live person answers the phone 24 hours a day, seven days a week, not a voicemail and certainly not a call center three states away. And before any work starts, you’ll have the price quoted and agreed, in writing. No surprises at the door. We offer $40 off any repair over $200, no trip charge anywhere inside the county, and a permanent 10% discount for seniors and veterans. Local homeowners with a written estimate from another company can bring it in for a free second opinion, no obligation.
Gate Repair Services We Offer in Van Nuys
Gate Access Control
From keypads and telephone entry to vehicle loop detectors and card readers, we handle the electronics that decide who gets in. Access control wiring fails quietly, especially in a neighborhood like Van Nuys where the summer heat cooks boards and connections inside metal enclosures. We test the signal path first, not just the keypad.
Learn more about Gate Access Control in Van Nuys.
Gate Repair
Weld-on hinge replacements, rack and gear rebuilds, steel frame straightening, and track re-bedding are all work we do on site. When we’re repairing a sagging or stuck gate, we look at the post, the hinges, the gate frame, and the operator as one system, not as four separate bills. Fix the panel without the post and you’ll fix it twice.
Learn more about Gate Repair in Van Nuys.
Gate Installation
A new gate is measured, ordered, and scheduled, not rushed into a same-day slot. We’ll take measurements in your driveway, talk through swing versus slide, steel versus aluminum, and the post depth the job truly needs, and then give you a written price for the whole install before you commit a dollar.
Learn more about Gate Installation in Van Nuys.
Gate Motor & Opener
We service nine major gate brands we’re certified on, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener hums but doesn’t move, or moves but doesn’t stop where it should, we’ll read the control board, check the capacitor and motor draw, and replace only what has actually failed.
Learn more about our home service area to see all gate and fence work we cover.
Gate Parts & Welding
We carry common hinges, rollers, v-track parts, safety edges, and receiver boards on the truck, and we weld on site, which is why locals know us for Van Nuys Gate Parts & Welding. So the gate stays in your driveway, the repair stays under your eyes, and the work doesn’t disappear into a shop across town for three weeks.
Neighborhoods We Serve in Van Nuys
We run calls all over Van Nuys and nearby, including Studio City, CA, and the pattern holds true wherever you go: postwar ranch homes and 1960s and 70s apartment complexes, with iron gates retrofitted in the 80s and 90s now failing a few decades later. We’re familiar with the block layouts and gate styles in each area, and we carry the parts to match. Typical response time in Van Nuys for a scheduled repair is same-day or next-day, and for a gate stuck open or closed we come out as fast as traffic on Van Nuys Boulevard allows.
- Midvale
- Valley Glen area near Van Nuys High School
- Lake Balboa edge along Victory Boulevard
- Sepulveda Basin side near Woodley Avenue
- Van Nuys Airport industrial corridor near Stagg Street
Why Van Nuys’s Climate & Housing Affect Gate Repair
Van Nuys sits in the deepest part of the San Fernando Valley heat basin, where summer temperatures routinely reach 105 to 110 degrees, roughly 15 to 20 degrees hotter than coastal LA cities. That heat is the dominant reason gate motors fail here. Repeated 100-degree-plus days warp aluminum gate frames, cause steel slide gates to expand and jump their tracks, and cook the capacitors and circuit boards inside gate operators far faster than the manufacturers ever rated them for. When a LiftMaster or BFT opener in Van Nuys fails in August, heat is usually where we start looking.
The housing stock adds a second factor. Van Nuys is built primarily on single-family ranch homes from 1945 through 1975 and a dense layer of 1960s and 1970s stucco apartment complexes, most of which had iron swing or slide gates bolted on as aftermarket additions during the 1980s and 90s. That retrofit-era hardware, often old Lo-Swing or older Linear operators, is now aging out and failing in large numbers across the neighborhood. In Midvale we regularly see hinge posts that were never set deep enough for a full-weight iron gate, and over by the airport corridor the heavy slide gates run on high daily cycles, which wears v-track and drive racks in a way a technician working quiet residential streets in Sherman Oaks would almost never run into. While we’re serving Sherman Oaks, CA too, the repair patterns there are quite different.
Fall Santa Ana wind events add another failure we see too often in Van Nuys. An unsecured swing gate caught by a gust can slam hard enough to bend a hinge or strip the gears inside the motor. Show me the gate closing on its own and I’ll show you where it’s failing, and after a wind event we usually find the failure at the stop, the hinge, or the operator mount.
Pricing for Gate Repair in Van Nuys
You should know the price before the work starts, and with us you will. A hinge replacement and gate adjustment in Van Nuys typically runs $180 to $340. Swing gate motor replacements are usually $600 to $1,800 depending on brand and duty rating, and a full slide gate track rebuild on a commercial gate near Van Nuys Airport can run $800 to $2,800 or more with new track, rollers, and rack. Circuit board replacements on LiftMaster, FAAC, or BFT operators commonly fall between $250 and $600. Every quote is agreed before work begins, and we respect your existing working parts. Many repairs qualify for the $40-off-over-$200 offer.
Service Area - Cities Near Van Nuys
If you live just outside Van Nuys, we also handle gate repair in nearby communities. We cover Sherman Oaks, Studio City, North Hollywood, and Encino regularly, so the same live-answer phone and written quote promise follows you across the Valley.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Van Nuys
Gate repair in Van Nuys typically costs $180 to $650 for most residential hinge, track, and motor service calls, with full operator replacements running higher depending on brand and gate size. The best way to get an exact Van Nuys price is to call (323) 677-4063, and Hal will give you an estimate based on what you describe, and a free on-site price before any work starts.
We schedule same-day or next-day calls across Van Nuys and keep the truck stocked so a single visit usually finishes the job. If your gate is stuck open or closed, call (323) 677-4063 and a live person will answer, day or night, and tell you when Hal can get there.
A gate motor replacement includes removing the old operator, installing the new one on the existing mount, setting limit and force settings correctly, reconnecting any existing safety edges and loops, and a full test cycle. The price is quoted and agreed before any work starts, and the job carries the 90-Day Done Right Promise in writing.
Yes, we handle the low-voltage power run, conduit, loop detectors, and required safety edges as part of gate installation in Van Nuys. We follow the state requirements for entrapment protection, because a gate is heavy enough to hurt someone, and the safety edges and photo eyes are not optional extras here. Call (323) 677-4063 for a free measure and a written installation price.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry brand-specific receiver boards and remote transmitters for most of those, so we don’t have to order a part and leave you waiting a week with a gate that won’t close.
Check that the gate has power at the outlet, the remote battery is fresh, and the manual release has not been left engaged. If the gate is in the process of closing on its own or straining at the post, the problem is usually mechanical rather than electrical. If anything is visibly sparking, or the gate is binding under tension, do not force it; call (323) 677-4063 and let Hal walk you through what to check before we come out.
If your gate is stuck, humming, sagging, or just not closing all the way on Van Nuys Boulevard, call (323) 677-4063 for a free estimate. A live person answers, and the person who shows up is Hal or someone from his crew, not a stranger in a rotating van. You’ll get a written price before work starts, and every repair comes with the 90-Day Done Right Promise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys and the San Fernando Valley.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Van Nuys Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth