Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Culver City
Gate repair in Culver City usually costs between $180 and $340 for common fixes like hinge replacement, realignment, or a failed latch, and most jobs are finished in one visit. That said, Culver City is not like the inland LA Basin when it comes to gates: four miles of salt-laden marine air off the Pacific eats uncoated steel hardware years faster than in Burbank or Pasadena. We have been fixing gates since 2001, and we know exactly which hinges, posts, and operator mounts survive out here. Call (323) 677-4063 and a real person answers, 24/7. Not a voicemail tree.
Key Takeaways
- Most Culver City gate repairs fall between $180 and $340; full hinge post rebuilds with new concrete run $600 to $1,100.
- Salt air here corrodes uncoated steel hinges and operator mounts in 2 to 4 years, not a decade.
- Culver City is its own municipality with its own permit office, separate from LA City rules.
- We offer on-site welding, a 90-Day Done Right Promise, and free estimates. Always.
Why Gatewood Fence & Gate Is Culver City’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, not a corporate logo. We are locally owned and owner-operated, with a published address and license number anyone can look up. When you call about a sagging gate on a 1930s Spanish Colonial in Blair Hills or an automated slide gate seizing up near the Hayden Tract, you talk to someone who has actually worked on those exact properties, not a call center three states away. Our Gate Repair team answers the phone around the clock, because a gate that will not close at 11 p.m. is a security problem. Not tomorrow’s problem.
Culver City customers tell us the same thing over and over: they got burned by a national outfit that quoted one price on the phone and a different one at the door. We do not do that. The price is quoted and agreed before any work starts, in writing. Every job carries our 90-Day Done Right Promise. If it is not done right, we make it right. One call brings Hal back. No runaround.
We are background-checked and uniformed on every job. We are certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And we weld on site, in your driveway, so your gate never has to leave your property.
Our Gate Repair Services in Culver City
Electric Gate Repair
Electric gate repair in Culver City often comes down to one thing: a motor trying to push a gate that no longer swings or slides freely. The marine layer does not just rust hinges; it corrodes the rack-and-pinion tracks and operator mounts until the motor overloads and trips. We test the full mechanical path first, then the control board. Most Culver City electric gate repairs run $200 to $400, and we stock common LiftMaster and Mighty Mule parts so you are not waiting on a shipment.
Automatic Gate Repair
Automatic gates fail for mechanical reasons 80 percent of the time, not electrical ones. On a 1920s Craftsman bungalow in Culver City’s flatlands, the original driveway gate posts were never poured to carry a 40-pound operator plus the torque of a swing cycle. Adding a motor to a post with a hairline footing crack means eventual misalignment, stripped gears, and a gate that faults out mid-cycle. We check the post, the footing, the hinges, and the travel path before we ever touch a circuit board.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Last spring we rebuilt a sagging swing gate at a 1930s Spanish Colonial in Blair Hills where the original wrought-iron hinge post had rotted at the footing from years of salt air. We poured a new concrete footing, set a galvanized steel post with stainless fixings, and remounted the original 40-year-old panel with corrected rack and pinion alignment. It swings true now, and it will for decades. That is the difference between a repair that lasts and one you pay for twice.
Gate Realignment
Realignment is usually the cheapest fix and the most commonly skipped one. In Culver City, where the clay-heavy soil under many older neighborhoods shifts with winter rains, gates drift out of square until the latch misses the strike plate or the slide wheels bind. We align the gate at the hinges and post, not by bending or shimming the panel. A proper realignment in Culver City runs $150 to $280 on average, and it stops the grinding before it destroys the motor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Culver City
We service Mighty Mule, LiftMaster, and FAAC openers regularly in Culver City, along with BFT and DoorKing on the commercial slide gates around the Hayden Tract. Because we work on these brands daily, we keep the most common boards, limits, and rack-and-pinion parts in stock. That matters in Culver City especially, because salt corrosion on operator boards and limit switches is a local reality, and the last thing you want is a two-week parts lead time while your gate stays stuck open.
Common Gate Repair Problems We See in Culver City Homes
- Rusted hinge posts at the footing: Salt-laden air wicks moisture down into the post pocket, and the steel rots from the inside. The gate starts sagging, then the post cracks at the base. Fix the panel without the post and you will fix it twice.
- Corroded rack-and-pinion tracks on slide gates: Uncoated steel tracks along Washington Boulevard and the Hayden Tract industrial conversions rust fast. The gate shudders, then seizes. We replace the rack with galvanized steel, not repainted mild steel.
- Operator overload from worn hinges: If your Mighty Mule or LiftMaster keeps tripping its breaker or beeping fault codes, nine times out of ten the hinge pins are rusted and the motor is working twice as hard as it should. We fix the hinge, then the motor runs cool.
- Masonry pier cracking on 1920s-1950s bungalows: Those original piers were built for a manual gate, not a 35-pound operator cycling 10 times a day. We set a new post footing inside the pier core before mounting any opener. That prevents hairline cracks from turning into a leaning post.
Pricing for Gate Repair in Culver City, CA
A typical hinge replacement or gate realignment in Culver City runs $180 to $280. Electric gate repair, including board replacement or limit adjustment, lands between $200 and $400 for most residential systems. Full hinge post rebuilds with a new concrete footing and galvanized post run $600 to $1,100, depending on the post size and whether we are remounting an existing panel or fabricating a new one. Weld and rust repair on wrought iron gates typically falls between $250 and $600, since Culver City’s salt air means we are often grinding out deep corrosion before we weld in fresh steel.
You get the price in writing before any work starts. No trip charge inside the county. Seniors and veterans always get 10 percent off, and any repair over $200 gets $40 off. If you already have a written estimate from another company, we will give you a free second opinion. Call (323) 677-4063 for an exact quote. Estimates are free.
We Also Serve Cities Near Culver City
Our Gate Repair in Culver City crew also covers Marina del Rey, Beverly Hills, Santa Monica, and West Hollywood. The drive is short, and we know the gate styles and coastal corrosion patterns across the whole Westside. If you are one town over and your gate is sagging or seized, call the same number: (323) 677-4063.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Culver City
Culver City sits roughly four miles from the Pacific, and the persistent marine layer carries airborne salt that settles on exposed steel. Uncoated hinges, latches, and operator mounts here corrode in 2 to 4 years, while the same parts in Burbank or Pasadena might last 8 to 10. That is why we use galvanized steel posts and stainless fasteners on every Culver City rebuild. A repainted hinge pin is a temporary sticker over a rust problem. Call (323) 677-4063 and we will tell you honestly whether your hardware can be saved or needs to be replaced.
Yes. Culver City is an independent municipality with its own building department, permit office, and code enforcement. Gate installation and major structural repairs follow Culver City’s own ordinances, not LA City’s. Contractors who only know LA City requirements routinely submit the wrong forms or miss Culver City’s specific footing depth rules, and the permit gets bounced. We have done this long enough to know which jobs need a Culver City permit and which are routine maintenance. Ask us before you start any installation, and we will tell you straight what the city requires.
Usually, yes. The original wrought-iron panels on those 1920s Craftsman homes in the Culver City flatlands are often worth keeping. The problem is almost never the panel; it is the post and footing that were never engineered for a motorized operator. We set a new concrete footing, install a galvanized steel hinge post with stainless fixings, and mount the original panel back onto it. That gives you the automation without junking the character. Figure $600 to $1,100 for the post and footing work, plus the operator. Call for a free measure and written price: (323) 677-4063.
Because those gates along Hayden Avenue, Jefferson, and National were built on tight industrial parcels with custom track lengths and shallow header clearances. Off-the-shelf LiftMaster or DoorKing slide gate parts do not fit. When corrosion seizes the rack and pinion, we often have to fabricate the replacement track or order a non-standard length, which adds lead time. That is a specialized service you will not find in residential-dominant cities like Beverly Hills or Santa Monica. For a Hayden Tract gate that is binding or faulting, call us and we will diagnose it properly the first time.
Every automatic gate in Culver City, residential or commercial, needs a functioning safety photocell and a reversing edge. That is not a suggestion; it is what the city inspector will check, and it is what keeps a child or a pet from being pinned. Show me the gate closing on its own and I will show you where it is failing. We test and replace safety edges and photocells on every automatic gate service call, because a gate that closes without a working sensor is a lawsuit waiting to happen. Call (323) 677-4063 and we will make sure your gate stops when it should.
Call Gatewood Fence & Gate for Culver City Gate Repair
We have been locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop, and the shop is down the road, not in another state. We weld on site. We quote before we work. We back every job with a 90-Day Done Right Promise in writing. If your gate is sagging, seizing, grinding, or refusing to close, call (323) 677-4063 now. A live person answers, 24/7, and the estimate is free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Culver City and the Westside since 2001.