Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in West Hollywood, CA
Hinge and post repair in West Hollywood typically costs between $250 and $600 for most residential gates, though the final price depends on whether we need to reinforce the existing concrete or re-weld a sheared hinge. We provide this service on-site, meaning we fix the problem in your driveway rather than hauling your gate off to a shop. If you are dealing with a sagging gate, a post that has shifted, or a hinge that has snapped, call us at (323) 677-4063. We are available 24/7 to answer your questions, and we offer free estimates for all gate repair services.
A gate is only as strong as its foundation. In West Hollywood, I see many gates that were installed with posts that were not set deep enough or hinges that were never rated for the weight of the steel. When you need professional help, you can return to our home page to see our full scope of work, or check out our dedicated page for Gate Repair in West Hollywood to understand how we handle the entire system.
Gatewood Fence & Gate has been locally owned and owner-operated since 2001. I am Hal Gatewood, and I have been doing this work for 29 years. I do not believe in replacing a gate when a simple, honest lock repair or hinge fix will do. If your gate is hanging low or hitting the pavement, it is usually a sign that the hinge or the post has failed, not the gate itself.
When You Need Hinge & Post Repair
You do not need to wait for a total gate failure to call for help. Often, the signs of a failing hinge or post are subtle at first. If you notice any of the following in your West Hollywood home, it is time to have a look before the gate becomes a safety hazard:
- The gate drags on the driveway: This is the most common sign of a hinge or post failure. If the gate is scraping the concrete, it is putting unnecessary strain on the motor, which will lead to a much more expensive repair later.
- A widening gap at the latch: If your gate no longer lines up with the latch receiver, the post has likely tilted or the hinge has bent. This leaves your property unsecured and makes the gate difficult to operate.
- Visible rust at the weld points: If you see rust bubbling around the hinges or the spot where the hinge meets the post, the integrity of the steel is compromised. This is a common issue in our coastal climate where moisture gets into the metal.
- The post feels loose or wobbly: If you can push on your gate post and feel movement at the base where it meets the ground, the concrete footing may be cracked or compromised. A loose post will never support a moving gate properly.
- Grinding noises during operation: If you hear metal-on-metal grinding when the gate moves, it is often a sign that the hinge pin is worn down or the gate is sagging enough to rub against the frame.
Safety Note: If your gate is sagging significantly, it is under high tension. Do not attempt to hold it up yourself or try to force it shut. These gates are extremely heavy, and a failing hinge can cause the entire panel to collapse, which is a serious injury risk. If your gate is stuck or leaning, keep children and pets away and call us to assess the situation. We have the equipment to stabilize the gate safely.
Our Hinge & Post Repair Process
I have built my business on the idea that you should be able to look your repair person in the eye. When you call Gatewood Fence & Gate, you get a straight answer. Here is how we handle hinge and post repairs in West Hollywood:
- Full System Inspection: I start by checking the weight of the gate and the condition of the hinges. I look for the root cause. Often, a customer thinks they need a new gate, but the problem is actually a post that was set in poor soil or a hinge that was undersized for the gate’s weight.
- On-Site Welding: I bring the shop to you. If a hinge has snapped or a bracket has failed, I weld it back on the spot. This saves you the cost and time of having the gate removed and transported.
- Post Stabilization: If the post is leaning, I determine if it can be reinforced or if it needs to be reset. In West Hollywood, we have specific soil conditions that can cause shifts over time. I use industrial-grade concrete and proper anchoring to ensure the post stays vertical.
- Hinge Adjustment and Alignment: Once the post is secure, I adjust the hinges to ensure the gate is level. A properly aligned gate should swing freely without dragging.
- The 90-Day Done Right Promise: Every repair I complete comes with my 90-Day Done Right Promise. If the weld fails or the post shifts again within 90 days, I come back and fix it. It is that simple.
Hinge & Post Repair Pricing in West Hollywood
I believe in upfront pricing. You will never be surprised by an invoice at the door. While every gate is different, the following ranges give you an idea of what to expect for common hinge and post services in West Hollywood.
| Service Type | Estimated Price Range |
|---|---|
| Minor Hinge Weld/Adjustment | $150 – $250 |
| Post Reinforcement/Bracing | $300 – $500 |
| Full Post Reset (Concrete Work) | $600+ |
Remember that we offer $40 off any repair over $200. We also provide a permanent 10% discount for seniors and veterans. If you have already received a written estimate from another company, I am happy to provide a free second opinion. We do not charge a trip fee for any service calls within the county. Call (323) 677-4063 for an exact quote.
FAQs - Hinge & Post Repair
Is it cheaper to repair the hinge or replace the whole gate?
Almost always, it is cheaper to repair the hinge. Most gates are built with heavy-duty steel that lasts for decades, but the hardware-the hinges and the posts-takes all the abuse. Replacing a perfectly good gate because of a bad hinge is a waste of your money. I specialize in weld & rust repair and fixing the parts that fail so you don’t have to replace the parts that don’t. Call (323) 677-4063 for an honest assessment.
Can you fix my gate today?
I prioritize urgent repairs because I know a broken gate is a security issue for your West Hollywood home. While I cannot promise a specific time without knowing your location and the complexity of the job, I do my best to get to you as quickly as possible. When you call, a live person answers the phone 24/7, so you will get an update on my schedule immediately.
What brands do you service?
I am certified for automatic gate repair on nine major brands, including LiftMaster, FAAC, BFT, and Mighty Mule. However, when it comes to hinges and posts, the brand matters less than the metal quality and the installation. I can work on almost any gate system, regardless of the opener brand, because I focus on the structural steel and the mechanical hardware that keeps the gate swinging.
Why is my gate post leaning?
A leaning post in West Hollywood is usually caused by the weight of the gate combined with soil movement or improper concrete footing. Over the years, the constant opening and closing of a heavy gate puts a “pull” on the post. If the concrete below ground was not wide enough or deep enough to counter that pull, the post will eventually shift. I can often stabilize these posts without having to dig up your entire driveway.
If you are ready to get your gate fixed by someone who has been doing this since 2001, give me a call. I answer the phone personally, and I show up when I say I will. You can reach me at (323) 677-4063 to schedule your free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood.