Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Encino
Gate parts and welding in Encino usually means one thing: a heavy ornamental steel gate that has stopped working, and a homeowner who needs it fixed today because their driveway is also their security perimeter. We’re Hal Gatewood’s crew, and we’ve been doing this work since 2001. If you live north of Ventura Blvd, in the hills around Hayvenhurst, or on a wide lot off White Oak, you already know the kind of gate we’re talking about: a slide or swing gate installed in the 80s or 90s, now sagging, binding, or refusing to close in the heat. If it’s beyond repair, we also handle Gate Installation - Encino. Call (323) 677-4063 and we’ll tell you straight what it needs.
Why Gatewood Fence & Gate Is Encino’s Preferred Gate Parts & Welding Company
We answer the phone. That sounds simple, but you’d be surprised how many gate companies in the Valley won’t. A live person picks up 24 hours a day, seven days a week - not a voicemail box, not an answering service in another state. When you call about a gate that won’t close on a 108-degree Encino afternoon, you talk to someone who understands that’s not an inconvenience. That’s your home sitting open.
We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice. Our address is published. Our license number is published. Anyone in Encino can drive to the shop and look Hal in the eye before we ever set foot on your property. That’s the oldest accountability there is.
We also weld on site. Most gate companies in this part of the San Fernando Valley want to haul your gate to a shop, weld it there, and bring it back days later. We don’t. We bring the welding rig to your driveway in Encino, do the work where the gate lives, and you watch it happen. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
Our Gate Parts & Welding Services in Encino
Here’s what we handle most often on Encino properties. This is our Gate Parts & Welding work, specialized for the gates this city actually has.
Hinge Replacement
A gate sags in the hinge post, not in the middle - and that is where we start. On Encino’s wrought iron swing gates, hinges take a beating from three directions at once: the weight of the gate, 105°F+ summer expansion, and Santa Ana wind loading. Most replacement hinges we install in Encino are stainless steel, sized for the gate’s actual weight, not whatever the original builder had lying around. Typical hinge replacement on a double swing gate in Encino runs $280-$620 per gate, including greaseable stainless pins and realignment of both leaves.
Post Replacement
Fix the panel without the post and you’ll fix it twice. That’s especially true in Encino, where post footings poured in the 1950s and 60s have spent decades absorbing Valley heat cycling. We cut out the old steel, weld in a new post with a deeper concrete footing, and set it true before the gate goes back on. Post replacement in Encino typically runs $450-$950 for a single hinge post on a standard driveway swing gate, and $800-$1,600 for a slide gate end post with the operator remount.
Rail Repair
Slide gates on Encino estates use either a V-track rail along the ground or a cantilever system with rollers. Both fail from heat. The rail warps or the concrete bed shifts, and the gate starts stalling mid-cycle. We repair, straighten, or replace rails and realign the support rollers so the gate runs true. Rail repair in Encino generally runs $350-$800 depending on length, access, and whether the old concrete bed needs chasing out and repouring.
Custom Welding
Encino has a lot of ornamental steel that was custom-built and is no longer manufactured. That means repair, not replacement. We weld cracks, rebuild hinge brackets, fabricate missing finials, and reinforce post bases on site. Custom welding jobs in Encino run from $180 for a single bracket repair up to $1,800+ for extensive structural rebuilding on a double swing gate. Every weld is done with rod and wire matched to the existing steel, and we give you a fixed number before striking an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encino
Most automated gates across Encino run on LiftMaster, Mighty Mule, FAAC, or BFT operators. For issues with any of these systems, see our Encino Gate Motor & Opener service. We’re certified to service those and five more brands, and we carry common repair parts for all of them in our truck stock - not in a catalog we have to order from. That means when a LiftMaster board thermal-trips on a July afternoon off Balboa Blvd, we don’t have to tell you to wait a week for freight. We also keep stainless gate hardware on hand because, honestly, that’s what Encino requires. Galvanized parts are fine in some climates. Here, with the heat, the dry air, and the occasional wet winter, stainless is the standard we recommend and the standard we install.
Common Gate Parts & Welding Problems We See in Encino Homes
- Swing gates sagging at the hinge post. The panel looks straight, but the gate drags. The post footing has cracked after 40 or 50 years of Encino’s heat-and-rain cycle, and the hinge bearings are shot. We replace the post and the hinges together, because doing one without the other is how you end up calling us again in six months.
- Slide gates stalling mid-cycle during heat waves. The operator’s thermal protection trips at 105°F+, the gate stops, and the homeowner assumes the motor is dead. Often the motor is fine - it just needs force and speed limits recalibrated for Valley operating temperatures, and the rollers need realignment after heat expansion threw off the original tracking.
- Weld failures at hinge brackets and post bases. Repeated thermal cycling and Santa Ana wind stress eventually crack ornamental steel, especially where water from Encino’s winter rains pools and rust gets a start. We grind out the fatigue crack, re-weld with matched filler, and often add a gusset plate so it doesn’t crack in the same place again.
- Rack and pinion gears binding on slide gates. Heat expands the steel frame, which shifts the gear mesh just enough to bind. The gate jerks, groans, or refuses to move. We realign the rack, replace worn gear teeth, and set the operator limits correctly for the expanded geometry.
Pricing for Gate Parts & Welding in Encino, CA
Here’s what you can expect to pay for common gate parts and welding work in Encino:
- Hinge replacement: $280-$620 per gate, stainless hardware included
- Single post replacement: $450-$950, depending on access and footing condition
- Slide gate rail repair: $350-$800, including roller realignment
- Custom welding repair: $180-$1,800+, depending on scope
- Full slide gate restoration (post, rail, rollers, operator recalibration): $1,400-$2,800
Every quote is written down, given to you before any work starts, and honored. No price changes at the door. We also give $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (323) 677-4063 for an exact quote - estimates are free.
We Also Serve Cities Near Encino
We work throughout the San Fernando Valley. If you’re in Gate Parts & Welding in Encino‘s neighboring communities, we cover Tarzana, Sherman Oaks, Van Nuys, and Studio City too. Same crew, same on-site welding, same 90-Day Done Right Promise. We’re familiar with the gate stock in all these neighborhoods.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Encino
The panel is usually fine. The post has moved. Encino’s 105°F+ summers expand the steel frame, the occasional wet winter contracts it, and decades of that cycle crack the concrete footing under the post. Once the post leans a few degrees, the gate sags. Replacing the post and the hinges at the same time fixes it. Call (323) 677-4063 and we’ll tell you if the panel can be saved - it almost always can.
Yes. We weld stainless hinges, brackets, and fixings onto existing wrought iron gates all the time. You need a specific rod to weld stainless to mild steel, and you need to prep the joint properly so you don’t get galvanic corrosion at the weld line. We do that on site. Stainless is the right spec for Encino’s dry heat and occasional wet winters, and it lasts decades longer than zinc-coated hardware here.
Usually, yes. A leaning post on a heavy swing gate means the footing below has cracked or the post itself is bending at ground level. Straightening it without replacing the footing is a temporary fix at best - and it’s dangerous on a gate that size. We replace the post, pour a deeper footing, and the job is done right. Call (323) 677-4063 for an honest read on your specific gate.
Every 12 to 18 months, and more often if your gate faces west into the full afternoon Valley heat. The rollers wear, the rack shifts with thermal expansion, and the gear mesh drifts. A service visit in Encino for a slide gate - roller inspection, rack realignment, gear lubrication, and operator recalibration - runs $180-$320. It’s cheaper than a snapped gear or a burned-out motor during a heat wave when the gate fails open.
Yes, every time. Post work changes the gate’s travel geometry, and welding can introduce current that affects the board. After any structural repair, we verify the photocells, reverse sensors, and force limits before we leave. A gate that doesn’t stop when it should is a liability, and we won’t sign off on our own work until the safety circuit tests clean. Call (323) 677-4063 and we’ll walk you through what your gate needs.
On a 1970s ranch estate north of Ventura Blvd, our crew replaced a corroded hinge post on a heavy wrought-iron swing gate that had sagged enough to drag across the driveway. The original post footing had cracked after decades of Valley heat cycling, so we cut out the old steel, welded in a new post with a deeper footing, and swapped in stainless fixings rated for Encino’s dry-heat-and-occasional-wet-winter cycle before recalibrating the LiftMaster operator’s force and speed limits for 105°F+ operation. The gate was closing square and smooth the same afternoon.
If you need our Gate Repair in Encino, call (323) 677-4063. A live person answers around the clock, the estimate is free, and the price you’re quoted is the price you pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Encino since 2001.