Electric Gate Repair in West Hollywood, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in West Hollywood, CA

Electric gate repair in West Hollywood typically costs between $200 and $650, depending on whether the issue is a simple gate realignment, a worn-out logic board, or a more complex motor failure. Most minor repairs, like resetting a limit switch or clearing an obstruction, are completed in under two hours, while motor replacements usually take a half-day. If your gate is stuck or refusing to open, call us at (323) 677-4063 for an honest assessment. We offer free estimates and upfront pricing, so you know exactly what you are paying before we turn a single wrench.

When your electric gate stops working, it is not just a nuisance; it is a security risk for your West Hollywood property. Whether you are dealing with a faulty LiftMaster opener or a BFT motor that has simply reached the end of its life, you need someone who understands the mechanical side of the system, not just the electronics. At Gatewood Fence & Gate, we handle these repairs differently. We don’t just swap out parts until the gate moves again. We look at the hinge, the track, and the power supply to find the root cause. This is a core part of our Gate Repair work, and it is how we have kept properties secure in this area since 2001.

The name on the shop is mine, and the shop is right down the road. When you call us, you aren’t getting a call center or a dispatcher; you are talking to someone who knows the equipment. I have been fixing gates in Los Angeles County for over 29 years, and I have seen every way a gate can fail. If you are tired of the runaround from national companies that promise the world and deliver a high bill, give us a chance to do it right the first time.

When You Need Electric Gate Repair

Electric gates are complex machines that live outside in the elements, and in West Hollywood, that means dealing with dust, heat cycles, and the occasional humidity that can wreak havoc on sensitive electronics. You usually know it is time to call us when you notice these specific signs:

• The gate moves a few inches and reverses: This is almost always a safety sensor issue. In West Hollywood, the bright morning sun can sometimes blind the photo-eyes, or the alignment might have shifted due to a settling post. We check the beam alignment and the wiring connections first.
• The motor makes a humming sound but nothing moves: If your Mighty Mule or FAAC motor is humming, it is trying to work, but something is physically stopping it. This could be a failed capacitor, a stripped gear, or an obstruction in the track. We check the physical resistance before assuming the motor is dead.
• The gate opens or closes on its own: This is a serious safety concern that points to a logic board malfunction or a loose wire in the control box. If your gate is acting possessed, turn off the power at the breaker immediately and call us.
• The gate is scraping or dragging on the driveway: An electric motor is designed to push a gate, not lift it. If the gate has sagged, the friction will burn out your motor very quickly. We fix the hinge post and the structural integrity of the gate frame before we even touch the electrical system.
• The remote controls are intermittent: If you have to stand right next to the antenna to get the gate to open, the receiver or the antenna wire is likely compromised. We can test the frequency and replace the receiver if the signal has degraded.

Our Electric Gate Repair Process

We do not believe in hauling your equipment off to a warehouse unless it is absolutely necessary. Most repairs can and should be done right in your driveway. Here is how we approach every service call:

1. Power and Safety Check: We start by cutting power to the system. Before we touch any wiring or mechanical parts, we ensure the gate is stable. Safety is the first priority, especially with heavy iron or steel gates that can cause serious injury if they fall.
2. Mechanical Inspection: We check the gate itself. A motor will fail prematurely if the gate is hard to push by hand. We look for rusted hinges, loose bolts, and debris in the track. If the gate doesn’t roll or swing smoothly manually, no amount of electrical repair will keep it running for long.
3. Diagnostic Testing: Once the mechanical side is cleared, we move to the electronics. We test the voltage at the control board, inspect the limit switches, and check the motor capacitors. This is where we identify if you need a specific part or just a simple adjustment.
4. On-Site Repair: We carry common parts for major brands like LiftMaster and FAAC. If we need to weld a bracket or reinforce a hinge, we have the gear to do it right there. We don’t leave until the gate cycles properly and the safety sensors are confirmed to be operational.
5. The 90-Day Done Right Promise: We test the gate with you to make sure it functions exactly as you expect. Every repair is backed by our 90-Day Done Right Promise. If something isn’t right, you call us, and we come back to make it right. No runaround, no excuses.

Electric Gate Repair Pricing in West Hollywood

We believe in upfront pricing. You will never see a surprise charge on your invoice. Because every gate and every problem is unique, we provide a free estimate for the work. However, to give you an idea of how much gate repair costs in West Hollywood, CA, here are the typical ranges for common repairs:

Remember that we offer $40 off any repair over $200, and we never charge a trip fee inside the county. If you have a written estimate from another company, we are happy to provide a free second opinion. We also provide a permanent 10% discount for seniors and veterans. Call (323) 677-4063 for an exact quote on your repair.

FAQs - Electric Gate Repair

Can you repair my gate motor today?

We answer our phones 24 hours a day, 7 days a week, and we prioritize urgent repairs where a gate is stuck open or creating a security risk. While we cannot guarantee a specific arrival time without knowing your location and the current schedule, we make every effort to get to our neighbors in West Hollywood as quickly as possible. Call (323) 677-4063 to see when we can get a technician to your property.

Is it cheaper to repair or replace the motor?

It is almost always cheaper to repair the motor if the internal gears are intact and the logic board is functional. We only recommend replacement if the motor is obsolete, the cost of parts exceeds the value of a new unit, or the motor has suffered catastrophic damage like a lightning strike or total gear failure. We will give you an honest recommendation based on what we see, not what we want to sell you.

Do you work on all brands of electric gates?

We are certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we have been doing this since 2001, we have experience with older systems that other companies might refuse to touch. If you have a brand not listed here, give us a call-we can usually source parts or find a way to get it running.

Why does my gate keep stopping halfway?

A gate that stops halfway is usually struggling against physical resistance or experiencing a signal interference. The motor has a built-in safety feature that tells it to stop if it feels too much weight or friction, which saves the motor from burning out. We look for bent tracks, heavy hinges, or debris that is causing the motor to work harder than it should. Call (323) 677-4063 and we can come out to inspect the path of your gate.

If you need reliable, honest gate repair, you know where to find us. We have been serving this community for over 29 years, and we stand by every job with our 90-Day Done Right Promise. Our technicians are background-checked and uniformed, and we are locally owned and owner-operated. For a free estimate, call us today at (323) 677-4063.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood.