Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Ghost Controls Gate Installation in West Hollywood: What to Know First
Ghost Controls gate installation in West Hollywood runs $850 to $2,400 for the opener and hardware, not counting the gate itself, and we can usually schedule you within three to five business days. We’re an independent Ghost Controls service provider, which means we install and service the brand without being tied to any factory script. Call (323) 677-4063 and you’ll get a real person who can tell you whether your job is a half-day install or something that needs a little more planning.
This page is for West Hollywood homeowners who already own a Ghost Controls opener, are thinking of buying one, or have one sitting in a box in the garage. We’ll walk through how these units actually fail, what a straight-up installation looks like, and what you should expect to pay. We’ve been at this since 2001, and Hal Gatewood’s name is on the shop.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls builds a solid residential opener. But every brand has its habits, and after two-plus decades of installing and repairing these units in West Hollywood, we know where they get tired. Here’s what we actually see:
- AXS Series arm detachment at the wrist joint. The quick-release pin on the AXS and DP series arms can work loose over time, especially on gates that cycle a dozen times a day. The symptom: the arm pops off the gate bracket but the motor keeps running. The fix is usually a new wrist pin and a properly torqued bracket, not a whole new arm. We’ve watched other companies sell a full arm assembly for a $14 pin.
- Control board failure after power surges. Ghost Controls boards are sensitive to the voltage dips and spikes that happen in the hills up near Laurel Canyon and along the Sunset Strip corridor. The opener will beep but won’t respond to any input. OEM boards take three to seven days to ship; quality aftermarket boards from a supplier we’ve used for years are often in stock locally and carry their own warranty. We’ll give you both options and let you decide.
- Battery backup draining in under a year on the DTP and LSM series. West Hollywood heat shortens battery life in these sealed units. If your gate only works when the power is on and dies the second it cuts out, the battery is cooked. We stock replacements that match OEM spec, and we test the charging circuit before we button it back up so you’re not replacing batteries every eight months.
- Sensor misalignment from gate post shift. Ghost Controls photo-eye sensors are mounted to the posts, and posts move. West Hollywood sits on hillsides with clay-heavy soil that swells in winter and shrinks in summer. The gate starts reversing at odd points or stops mid-cycle and flashes an error. The real fix is re-anchoring or shimming the post, not just bending the sensor bracket and hoping.
- Remote range dropping from interference. The 318 MHz remotes Ghost Controls ships are reliable, but newer West Hollywood buildings with dense wireless systems and the hillside terrain can cut range in half. A wired keypad or an external antenna mount solves it without replacing the whole unit. We’ve installed enough of these to know which fix holds and which one sends you back to the remote every three weeks.
Our Ghost Controls Gate Installation Process
Every Ghost Controls job we do in West Hollywood follows the same straight path. No surprises, no upselling, no hauling anything off unless it actually needs to leave your driveway.
- 1
The call. You tell us what’s happening or what you want installed. We’ll ask what model you have, whether it’s a swing or slide gate, and where the power is. That call usually takes ten minutes.
- 2
The visit. We come out, look at the gate, the posts, the ground, the power source, and the existing hardware. We check the hinges or the track before we even touch the opener because a gate that binds will kill any motor, Ghost Controls or otherwise.
- 3
The price. We quote the job in writing before anything gets ordered or any work starts. That number doesn’t change when we’re standing in your driveway. Upfront pricing is the whole point of calling us.
- 4
The work. We install the opener, set the travel limits, wire the safety sensors, program the remotes, and adjust the force settings to the actual weight of your gate. If the gate needs welding, we do it on site, right there in your driveway. Nothing leaves.
- 5
The test. We cycle the gate a half-dozen times or more, in both directions, with the sensors interrupted mid-cycle, with the remote, with the keypad, and under load if it’s a heavy double gate. Hal won’t leave until it cycles clean every single time.
- 6
The paperwork. You get a written invoice with exactly what was installed, what it cost, and the 90-Day Done Right Promise stamped on it. If it’s not done right, one call brings us back.
What Ghost Controls Gate Installation Costs in West Hollywood
Here’s what we charge for common Ghost Controls scenarios in West Hollywood. These are real numbers we quote every week, not a national average pulled from a spreadsheet.
| Job | Price Range |
|---|---|
| Single swing gate opener, basic install | $850 - $1,200 |
| Double swing gate, dual openers, synced | $1,600 - $2,400 |
| Sliding gate opener install with rack | $1,100 - $1,800 |
| Battery backup add-on | $300 - $500 |
| Keypad and additional remote programming | $120 - $220 |
What moves the price: gate weight, post condition, power run distance, and whether we’re also fixing a hinge or a sagging post while we’re in there. If the post is rotted or cracked, that has to be addressed first or you’ll be calling us again in six months. We’ll never try to talk you into a full gate replacement when a weld and a properly set post will do the job. Call (323) 677-4063 for a free estimate. You’ll know the number before we start, and that’s the number you’ll pay.
Why West Hollywood Homeowners Call Gatewood Fence & Gate for Ghost Controls Work
We’ve been locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop, the address is published, and the license number is right there for anyone who wants to look it up. That’s the oldest accountability there is: you can drive to the shop and look us in the eye if something’s not right.
Calls get answered by a live person, 24/7. Not a voicemail, not a call center three states away. You call, a human picks up. We’re certified on nine major gate brands, so if your Ghost Controls unit turns out to be beyond saving and you need a different direction, we can talk to you honestly about LiftMaster, Mighty Mule, or DoorKing without any incentive to push one over the other.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No fine print, no “up to,” no hedge. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a 10% discount for seniors and veterans. Every single time, no haggling required.
FAQs
Ghost Controls warranties cover manufacturing defects, but improper installation is the most common reason a warranty claim gets denied. If the travel limits are set wrong, the force settings are off, or the wiring isn’t properly protected, the board and motor take damage that the factory won’t cover. When we install your Ghost Controls opener, we document everything so any legitimate warranty claim has a clean paper trail.
Yes, and it’s one of the most common jobs we do in West Hollywood. The gate needs to be structurally sound first, meaning solid posts, working hinges, and no sag. If the gate binds or drags, no opener will last. We’ll weld, reinforce, or replace hardware as needed before mounting the opener, and we’ll tell you exactly what’s needed and why. Call (323) 677-4063 and we’ll take a look.
Most single opener jobs are done in one visit, usually four to six hours from arrival to final test. Double gates or jobs that need post repair can run eight hours or a second short visit. We schedule in specific time windows and we show up when we say we will.
We keep common Ghost Controls parts in our shop, including control boards, remote kits, batteries, wrist pins, and sensors. When we don’t have a part on hand, we give you the straight answer on timing, OEM versus quality aftermarket, and the price difference before you decide anything. You’ll never find out about a delay after we’ve already started the job.
If the arm, hinges, and posts are in good shape and the motor itself runs, repair is usually the smarter money. A board or a battery is a lot cheaper than a full replacement and gets you years more life. When a Ghost Controls unit is genuinely beyond saving, we’ll say so plainly and walk you through what a replacement actually costs, with no pressure to buy anything from us.
If your Ghost Controls gate is acting up in West Hollywood, or you’ve got a new opener sitting in the box and want it done right, call (323) 677-4063. Tell us what it’s doing wrong and we’ll tell you what it actually needs. Free estimates, straight pricing, and a promise in writing.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving West Hollywood and nearby areas.





Before
After
Before
After
Before
After