A Gatewood company - serving West Hollywood, CA

Linear Gate Repair Nationwide | Gatewood Fence & Gate

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Linear Gate Repair in West Hollywood: What to Know First

Linear gate repair in West Hollywood typically runs $240-$680 depending on whether you’re dealing with a dead control board, a worn actuator arm, or a hinge post that’s finally given up. Most Linear opener jobs are done same-day, and we quote the full price before any work starts. If you’ve got a Linear gate that won’t open, opens halfway and stops, or starts making a sound like gravel in a blender, call (323) 677-4063 and we’ll walk you through what you’re hearing before we even roll the truck.

Call (323) 677-4063

This page is written for West Hollywood homeowners who own a Linear operator and want somebody who actually knows the brand, not just somebody with a multimeter and a prayer. We’ll cover how Linear systems fail, what repairs cost in this part of LA County, and why we fix them the way we do.

Key Takeaways

  • We’re an independent Linear service provider, not a factory warranty center
  • Most Linear gate repairs in West Hollywood are finished in one visit
  • Price is quoted upfront and agreed before we touch a thing
  • Every job carries our 90-Day Done Right Promise, in writing
  • Call (323) 677-4063 anytime. A live person answers.

How Linear Products Fail and How We Fix Them

Linear operators are solid machines, but they have their habits. After 24 years of working on them in West Hollywood, we know exactly where they give up and why. These are the five failures we see most.

  • Linear LDO series and the dead capacitor. On Linear’s LDO residential swing and slide operators, the start capacitor is a known weak point. When it goes, the motor hums but won’t turn under load. We keep OEM-spec capacitors on the truck. The fix is 20 minutes and it saves you a $900 operator replacement.
  • APeX three-button station drift. Linear’s APeX line comes with those slim three-button control stations. After a few years of West Hollywood sun, the membrane buttons delaminate or the ribbon connector inside corrodes from morning fog off the hills. The gate opens fine from the remote but won’t respond at the keypad. We replace the station with a sealed, weather-rated unit and re-set the limits.
  • Photo eyes losing alignment on sloped drives. West Hollywood driveways are rarely flat, especially up in the hills near Laurel Canyon and off Holloway. Gate posts shift, the concrete settles, and the photo eyes that tell your Linear operator to stop and reverse drift out of line. The gate reverses for no reason or refuses to close. We don’t just re-aim the eyes, we shim and brace the posts so they stay aimed.
  • The rusted hinge post nobody looks at. A gate sags in the hinge post, not in the middle. On older West Hollywood properties with steel tube gates, the post fills with water from sprinkler overspray and rusts from the inside out. The Linear operator keeps trying to drag a gate that weighs twice what it should, and eventually the motor burns. We weld the post on site, replace the hinge, and let the operator do its actual job.
  • Aftermarket transformer swaps with the wrong amperage. We get calls where another company replaced a Linear transformer with a generic 16V part rated too low for the APeX or LDO board. The gate works for two weeks, then the board burns. Linear boards want clean, steady voltage. We only use the right transformer, and we test the circuit under load before we leave. A bench test without load tells you nothing.

Our Linear Gate Repair Process

Every Linear job we run in West Hollywood follows the same steps, because taking shortcuts is how you end up back at the same gate three weeks later.

  1. 1
    You call, we answer. A live person picks up at (323) 677-4063, gets the symptom out of you, and schedules a window that works.
  2. 2
    We show up and diagnose in the driveway. Hal or one of his guys goes over the operator, the gate, the hinges, the power supply. No guesswork.
  3. 3
    We give you a written price before any work. The number we quote is the number you pay. No surprise line items, no “it got worse while we were in there.”
  4. 4
    We fix it with the right parts. Where it matters (boards, capacitors, limit switches), we use Linear-spec components. Where a quality aftermarket part does the same job for less, we tell you and let you choose.
  5. 5
    We test it until we’re annoyed with testing it. We cycle the gate six-plus times in a row, check the safety reverse, and watch the limits land clean.
  6. 6
    You get the 90-Day Done Right Promise in writing. If it acts up in 90 days, one call brings us back. No runaround.

What Linear Gate Repair Costs in West Hollywood

Honest numbers for common Linear repairs in West Hollywood, based on what we quote every week:

  • Capacitor replacement (LDO hums, won’t move): $180-$260
  • Photo eye realignment or replacement: $150-$300
  • Control board diagnosis and repair: $200-$500, depending on board condition
  • Transformer swap with correct OEM-spec amperage: $160-$280
  • Hinge post welding, on site: $400-$800, depending on post damage
  • Full gate realignment with hinge replacement: $300-$700

What moves the price is access (hillside drives with tricky parking add time), post damage, and whether the operator was installed originally or retrofitted poorly. Call (323) 677-4063 for an exact quote. Estimates are free, and the number we give you over the phone is what we stand on.

Why West Hollywood Homeowners Call Gatewood Fence & Gate for Linear Work

We’ve been fixing gates in and around West Hollywood since 2001. Hal Gatewood’s name is on the shop and on every invoice. That means when something gets done wrong, you know exactly who to hold accountable, and it won’t be a rotating cast of subcontractors. Our 90-Day Done Right Promise is stamped on every job in plain English.

We answer the phone with a live person 24/7, not a voicemail tree. And because we service nine major brands, including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, we can spot a Linear problem quickly because we know what a properly running gate system looks like across the board. If your Linear operator is beyond saving, we’ll tell you straight and show you options instead of patching it with zip ties and charging you for the privilege.

We’re also the shop that will drive to your place, look at the gate, and hand you a written estimate with no trip charge inside the county. If another company already gave you a written estimate, bring it to us for a free second opinion. And if you’re a senior or a veteran, you’ll get a 10% discount on every job, permanently.

FAQs

Need Gate Repair help in West Hollywood? Licensed & insured · within the hour response · free estimates
Call (213) 329-4288
Local Service Coverage

Request a Free Estimate in West Hollywood

Tell us what you need - Gatewood Fence & Gate responds fast. No obligation.

By providing your information above, you confirm you have read our Privacy Policy and agree that you may be contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch