Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in West Hollywood?
Gate Parts & Welding services in West Hollywood typically cost between $185 and $450 for standard onsite jobs, while complex structural gate repairs involving heavy-duty welding or hinge fabrication can range from $450 to $950. Most minor hinge, latch, or simple bracket welding repairs are completed for under $300, and we provide upfront pricing before we strike an arc so you know exactly what the bill will be.
If your gate is dragging on the concrete near the Sunset Strip or sagging at the post in the hills, you don’t need a new gate. You need a repair that addresses the structural cause. I’m Hal Gatewood, and for over 29 years, I’ve been telling homeowners that a gate doesn’t just break in the middle-it breaks at the connection points. At Gatewood Fence & Gate, we specialize in Gate Parts & Welding in West Hollywood, focusing on fixing what you have rather than trying to sell you a replacement you don’t need.
Gate Parts & Welding Cost Breakdown (2026)
When you call us for an estimate, we don’t guess. We look at the metal, the stress points, and the hardware. Here is what you can expect to pay for professional welding and parts replacement in the West Hollywood area this year.
| Service Description | Estimated Cost Range |
|---|---|
| Minor onsite welding (hinge reinforcement, bracket repair) | $185 - $320 |
| Structural hinge post fabrication & welding | $350 - $600 |
| Gate latch mechanism replacement & alignment | $150 - $275 |
| Heavy-duty gate wheel/roller replacement (parts + labor) | $225 - $400 |
| Gate motor arm bracket re-welding | $280 - $450 |
| Complete gate frame structural bracing | $500 - $950+ |
These ranges cover the labor and the materials we bring to your driveway. Because we are locally owned and owner-operated, we don’t have the overhead of a national franchise, and we pass those savings on to you. If your repair exceeds $200, remember to ask about our $40 discount. We also never charge a trip fee if you are within our county service area.
What Affects Gate Parts & Welding Pricing in West Hollywood
Every gate in West Hollywood faces specific challenges. Whether you’re dealing with the salt air that accelerates rust or the shifting soil in the hilly neighborhoods, the environment dictates the wear and tear. Here is what actually drives the cost of your repair:
- Metal Thickness and Condition: If the gate frame is rusted through to the point of turning to flakes, we have to cut back to solid metal before we can weld. The more prep work required to get down to healthy steel, the more time it takes, which impacts the final price.
- Hinge Post Integrity: A gate that drags isn’t just a gate problem; it’s a post problem. If we have to reinforce or re-plumb the hinge post, it requires more precision and heavier welding equipment than a simple latch fix.
- Access and Clearance: We perform on-site welding, which means we bring the shop to your driveway. If your gate is in a tight alleyway or on a steep slope, maneuvering our equipment takes longer, and safety protocols require extra setup time.
- Part Compatibility: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate uses proprietary hardware that requires specific modification to fit, the cost reflects the extra fabrication time.
- Urgency and Safety: A gate that won’t close is a security risk, not just an inconvenience. If a high-tension cable or a primary hinge has failed, it creates a dangerous situation. We prioritize these calls to ensure your property remains secure.
Safety Warning: Please do not attempt to weld or repair high-tension gate components yourself. Gate springs, cables, and heavy iron frames under pressure can cause severe injury if they snap or shift unexpectedly. If you see a cracked weld on a heavy gate, keep people and pets back and call a professional who has the right equipment to secure the load before working on it.
How to Save on Gate Parts & Welding
You don’t need to overpay to get a gate that opens and closes smoothly. The best way to save money is to catch the problem before it destroys the rest of the gate. A gate that drags on the pavement for six months will eventually warp the entire frame, turning a $200 repair into a $1,000 fabrication job.
We offer a few ways to keep costs down:
- The Second Opinion Advantage: If you have a written estimate from another company that seems high, show it to us. We offer free second opinions on any written estimate for gate work in West Hollywood.
- Senior and Veteran Discounts: We believe in supporting those who have served or who have been part of our community for a long time. We offer a permanent 10% discount for seniors and veterans on all our services.
- Bundled Repairs: If your hinge needs welding, check your latch and your motor bracket at the same time. Since we are already on-site with our welding rig, bundling these small fixes is always cheaper than calling us out for two separate visits.
If you are ready to get your gate back in working order, call (323) 677-4063. You won’t get a call center or a chatbot. You’ll get a live person, 24/7, ready to schedule a time for us to come out and take a look.
FAQs - Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in West Hollywood?
Welding a broken gate hinge typically costs between $185 and $320, depending on whether we need to fabricate a new mounting plate or if the existing metal is solid enough to weld directly. We always clean the metal thoroughly before welding to ensure the repair lasts, and we stand by our work with our 90-Day Done Right Promise. Call (323) 677-4063 to get a specific estimate for your gate.
Is it cheaper to repair a rusted gate or replace it?
In 90% of the cases we see, it is significantly cheaper to repair a rusted gate than to replace it. We specialize in on-site welding, which allows us to cut out the rusted sections, weld in new steel, and reinforce the frame for a fraction of the cost of a custom fabrication and installation. If the frame is too far gone, we will be honest with you about it, but we always look for the repair-first option.
Do you charge extra for emergency gate welding at night or on weekends?
We do not use “emergency” pricing tactics. We charge our standard rates for the work performed, regardless of the time of day, because we know a gate that won’t lock is a security issue. If you have an urgent issue, call (323) 677-4063, and we will get someone out to help you as soon as possible.
Can you fix my gate motor bracket without replacing the whole motor?
Yes, we frequently weld broken motor brackets or reinforce the mounting points without needing to replace the motor itself. If the motor is still functional, there is no reason to replace it just because the bracket has snapped. We can fabricate a custom bracket or repair your current one on-site, saving you the cost of a new unit.
What is your 90-Day Done Right Promise?
Our 90-Day Done Right Promise means that if the repair we performed fails or doesn’t function as expected within 90 days, we come back and fix it on our dime. It’s written on every invoice, not buried in fine print. We have been doing this since 2001, and we know that if you do the job right the first time, you don’t need to hide behind complex warranties.
Pricing reflects the West Hollywood market as of 2026. Gatewood Fence & Gate offers free estimates - call (323) 677-4063.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood since 2001.
What Our Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth